Diagnostic Error Code FRU/Action
011-197-XXX
Serial port test warning 1.Make sure
component that is
called out is enabled
and/or connected
2. Re-runtest
3. Component that is
called out in warning
statement
4. Component under test
011-198-XXX
Serial port test aborted 1. If a component is
called out, make sure
it is enabled and/or
connected
2. Flash the system and
re-test
3. Go to “Undetermined
problem” section.
011-199-XXX
Serial port test failed, cause
unknown
1. Go to “Undetermined
problem” section.
2. Flash the system and
re-test
3. Replacecomponent
under function test.
011-2XX-XXX
Serial port signal failure 1. External serial device
2. Systemboard
014-000-XXX
Parallel port Interface Test
Passed
1.No action
014-001-XXX
Parallel port Presence 1. Removeexternal
parallel device, if
present
2. Run setup, enable port
3. Systemboard
014-002-XXX
014-003-XXX
Parallel port Timeout/Parity
error
1.System board
014-013-XXX
014-014-XXX
Parallel port Control
Signal/Loopback test failure
1.System board
014-015-XXX
Parallel port External
Loopback failure
1.Wrap plug
2. Systemboard
014-027-XXX
Parallel port
Configuration/Setup error
1. Run Setup, enable
port
2. Flash the system
3. Systemboard
014-03X-XXX
014-04X-XXX
Parallel port failure
1.System board
014-195-XXX
Parallel port Test aborted by
user
1.Information
2. Re-start the test, if
need to
8IBM PC 300/IntelliStation Vol 3 HMM