3) If it was necessary to adjust the length of
the slide rails, tighten the nuts on the slide
rail, using pliers, a socket wrench, or an
adjustable wrench.
4. Attach the slide rail to the right side of the rack
enclosure.
a. Extend the outer slide rail until the slide bracket
is flush against the outside of the right front
mounting rail. Align the slide bracket with the
cage nuts on the mounting rail.
b. From the front of the rack enclosure, insert two
long screws through the slide bracket and
mounting rail. Press the slide rail so that it is
flush with the outer edge of the mounting rail and
tighten the screws.
178 IBM PC 300/IntelliStation Vol 3 HMM