7. To exit from the Configuration/Setup Utility program,
press Esc and follow the instructions on the screen.
Wake on LAN
This setting is used to enable or disable the
IBM-developed Wake on LAN feature. This feature makes
it possible for the computer to be turned on remotely by a
network server. Remote network management software
must be used in conjunction with this feature.
To access the Wake on LAN setting:
1. Start the Configuration/Setup Utility program. See
“Setup Utility program” on page 241.
2. Select Advanced Power Management.
3. Select Automatic Power On from the program menu.
4. Select Wake on LAN from the Automatic Power On
menu.
5. To enable Wake on LAN, select Enabled. To disable
Wake on LAN, select Disabled.
6. Press Esc until you return to the Configuration/Setup
Utility program menu.
7. Before you exit from the program, select Save
Settings from the Configuration/Setup Utility program
menu.
8. To exit from the Configuration/Setup Utility program,
press Esc and follow the instructions on the screen.
IntelliStation - 6867 257