CD-ROM/hard drive bracket
To open the CD-ROM/hard drive bracket:
1. Remove the top cover.
2. Slide the plastic spring loaded cage retainer to the
left.
3. Lift the cage up and swing it back to the service
position.
CD-ROM drive removal
To remove the CD-ROM drive:
1. Remove the top cover.
2. Put the CD-ROM/hard drive bracket in its service
position.
3. Disconnect the CD-ROM signal and power cables.
4. Remove two screws securing the CD-ROM drive.
5. Pull the CD-ROM drive out of the bracket.
64 IBM PC 300/IntelliStation Vol 3 HMM