IBM user manual Ordering Information, CMX58886CX Model Options, Cable Kits and Accessories

Ordering Information

The CMX58886CX cpuModule is available with a 1.0 GHz processor and 256 or 512 MB of DDR SDRAM. The cpuModule can also be purchased as part of an Intelligent Data Acquisition Node (IDAN™) building block, which consists of the cpuModule and a milled aluminum IDAN frame. The IDAN building block can be used in just about any combination with other IDAN building blocks to create a simple but rugged PC/104 stack. Refer to Appendix C, IDAN™ Dimensions and Pinout, for more information. The CMX58886CX cpuModule can also be purchased as part of a custom-built RTD HiDAN™ or HiDANplus High Reliability Intelligent Data Acquisition Node. Contact RTD for more information on its high reliability PC/PCI-104 systems.

CMX58886CX Model Options

The basic cpuModule model options are shown below. Refer to the RTD website (www.rtd.com) for more detailed ordering information.

Table 1 CMX58886CX cpuModule Model Options

Part Number	Description
CMX58886CX1000ER-512	1.0 GHz, 512MB DDR-SDRAM cpuModule
CMX58886CX1000ER-256	1.0 GHz, 256MB DDR-SDRAM cpuModule

Cable Kits and Accessories

For maximum flexibility, RTD does not provide cables with the cpuModule. You may wish to purchase the CMX58886CX cpuModule cable kit (P/N XK-CM65), which contains:

•Multi-function utility harness (keyboard socket, battery, reset, speaker)

•Two serial port cables (DIL-10 to DSUB-9)

•Parallel port cable (DIL-26 to DSUB-25)

•Two IDE cables

•VGA monitor cable (DIL-10 to high density 15-pin DSUB)

•Power cable (DIL-12 to wire leads)

•Two USB cables (5-pin SIL to USB A)

•Audio Cable (DIL-10 to three Mini-Jacks)

•One Ethernet cable (DIL-10 to RJ-45)

A floppy drive cable kit (P/N XK-CM49) is also available for connecting to to the multiPort. This cable kit comes with:

•3.5” HDD Floppy Drive with a multiPort interface board

•Two floppy cables

For additional accessories, refer to the RTD website.

BDM-610000050 Rev A Chapter 1: Introduction 5