3INSTALLING THE
NETWORK DRIVER
This chapter describes how to install the network driver
that completes your PC connection to the network. The
3C905B-TX adapter software is installed with the network
driver.
Instructions are provided for Windows 95, Windows 98,
Windows NT, and NetWare DOS client and server driver
installation. Table 3-1 provides a complete list of supported
drivers and text files that describe how to install them.
Go to the section your MIS department recommends and
follow the instructions to install the network driver on
your PC.
You can obtain the latest network drivers on 3Com’s
World Wide Web site. To access the Web site, enter the
3Com URL into your Internet browser:
http://infodeli.3com.com/infodeli/swlib/n_i_c.htm/
The drivers are in the Support area. On the Support Welcome
screen, scroll down to Latest Drivers and click.
Windows 95
This section describes how to install the network driver
when your PC is running Windows 95. This driver supports
dRMON and PACE technology.
This driver can be used in Microsoft and NetWare
environments, and instructions are included for both.
You need the Windows 95 system installation files (CAB files)
to complete the installation.
Do not use the AutoLink software to install the driver if you
are running Windows 95.