Windows NT 3-7
If Windows NT networking is not installed, you may also
need the following information from your MIS department:
■Whether you are on a LAN or are connecting to one
through a modem
■Protocol used in the Microsoft Windows Network
(typically TCP/IP or NetBEUI)
■Name of the Windows NT server domain or workgroup
you belong to
■IP address if you are not using DHCP
Windows NT Version 4.0If you already have the 3C905B-TX network driver and
want to update it, follow the instructions provided in the
next section.
Updating the Network Driver
To update the driver, follow these steps:
1 Install the 3C905B-TX adapter and connect it to the
network, as described in Chapter 2.
2 Restart the PC and start Windows NT.
3 In the Control Panel, double-click Network.
4 In the Network window, select the Adapter tab.
5 Select 3Com EtherLink XL NIC.
6 Click Update.
7 Insert EtherDisk Diskette #2.
The driver is updated.
Installing the Network Driver
Follow these steps to install the network driver in a PC
running Windows NT version 4.0:
1 Install the 3C905B-TX adapter and connect it to the
network, as described in Chapter 2.
2 Restart the PC and start Windows NT.
3 In the Control Panel, double-click Network.
4 In the Network window, select the Adapter tab.