0031-639 0031-645
0031-639 Exit status from pm_respond =
number
Explanation: The pm_respond function exited with the indicated status.
User Response: If other error messages occurred, perform corrective action indicated for
the message(s); otherwise, no action is required.
0031-641 Unrecoverable failure in Resource Manager, terminating partition...
Explanation: A non-zero return code was returned from the SP Resource Manager
message interpretation function. The Partition Manager terminates the partition. The return
code value is printed. The defined values are:
1 - A system error occurred. An explanatory message follows.
3 - A socket error occurred. Probably the Resource Manager has failed. If this is a batch
job running under LoadLeveler, the job will be terminated.
User Response: Correct the condition causing the non-zero return code, and restart POE.
0031-642 End of File from Program Marker Array
Explanation: The socket connecting POE to the Program Marker Array has returned EOF.
Execution of POE continues.
User Response: If the Program Marker Array has not been deliberately terminated,
determine the cause of the EOF, and, if desired, restart POE. Otherwise, ignore the
message and allow the POE job to terminate normally.
0031-643 Error read from Program Marker Array
Explanation: The socket connecting POE to the Program Marker Array has returned an
error condition. POE continues. The defined error codes are:
1 - I/O error on the socket. An explanatory message is appended if errno is set.
2 - POE was unable to allocate storage for the message from PM Array. Probable
internal error. Gather information about the problem and follow local site procedures for
reporting hardware and software problems.
3 - Some other error. An explanatory message is appended if errno is set.
User Response: If the Program Marker Array has not been deliberately terminated,
determine the cause of the error, and, if desired, restart POE. Otherwise, ignore the
message and allow the POE job to terminate normally. If the error code was 2 or 3, gather
information about the problem and follow local site procedures for reporting hardware and
software problems.
0031-644 Can't route PM Array message to task
number
Explanation: An error occurred while trying to forward a message from the Program
Marker array to the indicated task. POE continues, but the connection to PM Array is closed.
User Response: Probably the remote task is no longer active, but the Program Marker
array responses are backlogged. In this case, the messages can be ignored. Otherwise,
look for other failures that may also cause this symptom.
0031-645 PM Array message to unknown destination
number
Explanation: The PM Array message is not to a remote task and not for the Home Node.
The destination code is given. POE continues, but the connection to PM Array is closed.
User Response: Probably the PM Array tool is issuing invalid messages. Check the PM
Array application.
90 IBM PE for AIX V2R4.0: Messages