0031-103 0031-116
0031-103 Invalid MP_TTEMPSIZE
Explanation: The MP_TTEMPSIZE environment variable specifies too large a trace file (or
an invalid number).
User Response: Reduce or correct the size.
0031-104 Incorrect MP_TTEMPSIZE unit
Explanation: The MP_TTEMPSIZE environment variable is not of the form
number
M or
number
G.
User Response: Correct the flag.
0031-105 Invalid MP_TPERMSIZE
Explanation: The MP_TPERMSIZE environment variable specifies too large a trace file (or
an invalid number).
User Response: Reduce or correct the size.
0031-106 Incorrect MP_TPERMSIZE unit
Explanation: The MP_TPERMSIZE environment variable is not of the form
number
M or
number
G.
User Response: Correct the flag.
0031-110 pm: atexit
Explanation: The user exit handler could not be installed.
Cause: Probable PE error.
User Response: Gather information about the problem and follow local site procedures for
reporting hardware and software problems.
0031-113 Stopping the job. Wait 5 seconds for remotes.
Explanation: The Partition Manager has received a SIGTSTP signal from the LoadLeveler
program or the <Ctrl-Z> keyboard interrupt and is preparing to stop the job on all the remote
nodes. The system will then issue a stop message giving the task number for the job as it
would for any <Ctrl-Z> keyboard interrupt.
User Response: Wait for the stop confirmation message. To continue the job in the
foreground, type in fg
tasknumber
after you receive the stop message. To continue the job in
the background, type in bg
tasknumber
after you receive the stop message.
|0031-115 invalid resd option.
|Explanation: The specification of the -resd option was neither YES or NO.
|User Response: Correct the specification.
|0031-116 MP_RESD not set correctly.
|Explanation: The specification of MP_RESD was neither YES or NO.
|User Response: Correct the specification of MP_RESD.
Chapter 4. POE Messages 59