0031-172 0031-203
0031-172 I/O buffer overflow
Explanation: The stdout or stderr string overflows the output buffer (8K). The excess is
discarded.
User Response: Probable internal error. Normally, the output is automatically flushed if it
exceeds the buffer length. Gather information about the problem and follow local site
procedures for reporting hardware and software problems.
0031-179 Unable to acknowledge profiling request for task
number
Explanation: An error occurred writing a message to the indicated task, allowing it to begin
to write the profiling data to disk.
User Response: Probable internal error. Verify that the indicated node is still connected in
the partition. Gather information about the problem and follow local site procedures for
reporting hardware and software problems.
0031-180 read(PROF)
Explanation: Processing continues. An explanatory sentence is appended.
User Response: The Partition Manager cannot read the remote node's response to a
SIGUSR1 profiling signal.
0031-183 Connection to task
number
blocked. Task abandoned.
Explanation: While trying to stop the indicated task on a remote node, the Partition
Manager discovered that the socket connection was blocked (unavailable). The remote task
is marked as inactive and the Partition Manager continues.
User Response: Manual intervention may be required to kill the job on the remote node.
0031-200 pmd: getpeername <
string
>
Explanation: The daemon is unable to identify the partition manager.
User Response: Probable system or communication subsystem failure.
0031-201 pmd: setsockopt(SO_KEEPALIVE): <
string
>
Explanation: The daemon is unable to set the indicated socket option. Explanatory
sentence is provided.
User Response: Probable system or communication subsystem failure.
0031-202 pmd: setsockopt(SO_LINGER): <
string
>
Explanation: The daemon is unable to set the indicated socket option. Explanatory
sentence is provided.
User Response: Probable system or communication subsystem failure.
0031-203 malformed from address: <
string
>
Explanation: The socket address family is incorrect.
User Response: Probable system error. Gather information about the problem and follow
local site procedures for reporting hardware and software problems.
66 IBM PE for AIX V2R4.0: Messages