IBM GC28-1982-02 manual Stopped, Left, String failure, VTtrcinit, Will, Trace

0033-3095 Ÿ 0033-3100

0033-3095

VT_trc_capture write_buffusd_data() Insufficient

disk

space

to

write,

Tracing

stopped.

Space

left

is

number , required

is

number

Explanation:

Not enough disk space left.

Error

Class:

Insufficient

disk

space.

User

Response:

Clean

the

disk.

0033-3096 VT_trc_init() HPSOclk_init

string failure,

Tracing

is

disabled.

Error

is

string

Explanation:

Clock

initialization

failed

during

trace

initialization.

Tracing

cannot

c

and

is

disabled at

this

time.

Error

Class:

An unknown error was encountered in HPSOclk_initerrno andglobalthe

variable

was

set

with

the

error

code.

User

Response:

If the problem persists, gather information about the problem and

local

site

procedures

for

reporting

hardware

and

software

problems.

0033-3097

VT_trc_capture() HPSOclk_gettime failed,

Tracing

stopped.

Error

is

string

Explanation:

Cannot

read

the VT trace record time stamp.

Error

Class:

System

problem.

User

Response:

Gather information about the problem and follow local site procedu

reporting

hardware

and

software

problems.

0033-3098

VT_trc_init():

SP

Switch

Option

was

not

detected.

The

time of

day

clock

will

be used

to

timestamp

trace

records

Explanation:

The

program

is

indicating

that

it

is

not using the SP switch to sync

trace

records

across

nodes.

This

is

not

a

problem

unless

the

program

SHOULD

b

switch.

Error

Class:

The/dev/css0 device is not present, is present but at a back level

operating

properly.

User

Response:

Ensure

that

ssp.css

is

installed

and

that /dev/css0 is present. I

to

be,

refer

to

css

documentation

for

problem

determination procedures.

0033-3099

VT_trc_init():

SP

Switch

Option was

detected

and

will

be

used

to

timestamp

trace

records

Explanation:

The

program

is

indicating

that

it

is using the SP switch to synchroni

trace

records

across

nodes.

This

is

not

a

problem

unless

the

program

SHOULD

NO

using

the

switch.

Error

Class:

The/dev/css0

device

is

present

and

functioning

normally.

User

Response:

Gather information about the problem and follow local site procedu

reporting

hardware

and

software

problems.

0033-3100 VT_trc_init(): Unknown configuration detected during clock initialization.

Explanation: The program is indicating that after the initializing the trace rec stamp, an unknown switch configuration was detected. Since initialization completed successfully, tracing continues but the resulting trace file should be checked integrity.

User Response:	Even	if	the trace file appears correct, report the message fol
site procedures		for	reporting hardware and software problems.

162 IBM PE for AIX V2R4.0: Messages