0031-252 0031-259
0031-252 task
number
stopped:
string
Explanation: The indicated task has been stopped. The second variable in this message
indicates the signal that stopped the task.
User Response: Probable system error. Gather information about the problem and follow
local site procedures for reporting hardware and software problems.
0031-253 Priority adjustment call failed: rc =
number
, errno =
number
Explanation: The call to start the priority adjustment process failed. Check that the priority
adjustment program is executable. Execution continues, but no priority adjustment is applied
to this process. The return code and errno reported relate to the system function.
User Response: Probable system error. Gather information about the problem and follow
local site procedures for reporting hardware and software problems.
0031-254 User
string
not authorized on host
string
Explanation: The userid is not found on the given host.
User Response: Add the userid to the host with SMIT.
0031-255 Group
string
does not exist on host
string
Explanation: The group id is not found in /etc/group.
User Response: Add the groupid to the host with SMIT.
0031-256 Priority adjustment process has been invoked
Explanation: The user has elected to adjust the priority of the poe job.
User Response: Informational only, no action required.
0031-257 mp_euilib is not us, high priority daemon has been started.
Explanation: User has elected to use high priority for the poe job and the userspace library
is not being used.
User Response: Informational only, no action required.
0031-258 User
string
not authorized for group
string
on host
string
.
Explanation: The userid is not permitted to access the given groupid on the given host.
User Response: Add the userid to the group access list on the host.
0031-259 /etc/poe.priority file not found; priority adjustment function not started
Explanation: In attempting to start the dispatching priority adjustment function, there was
no /etc/poe.priority parameter file found for this task. Most likely, it was not set up or is
inaccessible. Normal application execution continues, although the priority adjustment
function will not be run.
User Response: Ensure the /etc/poe.priority file exists. Consult the chapter on File
Formats in the IBM AIX Parallel Environment: Installation manual for further details.
Chapter 4. POE Messages 69