InFocus LP260 manual Display

Display

This feature allows you to turn the on-screen displays on and off. Select “On1” to show all displays, select “On2” to show all dis- plays except the Preparation screen, select “Off” to turn off all displays.

Ceiling

When you turn Ceiling on, the projector turns the image upside down for ceiling-mounted projection.

Rear

When you turn Rear on, the projector reverses the image so you can project from behind a translucent screen.

Power Management

This feature preserves lamp life by automatically turning the lamp off after no signal has been detected for five minutes.

1When the input signal is interrupted, the message “No signal” appears with a counter that starts at 5 and counts down to 0.

2After the counter reaches 0, the lamp is turned off, the Ready indicator turns off, and the fans run for 90 seconds. During this cool down time, the lamp cannot be turned on.

3After 90 seconds, the Ready indicator blinks and the lamp can be turned back on.

The lamp is automatically turned on when the input signal is re-connected or any button on the remote or keypad is pressed.

Lamp Age

This allows you to reset the lamp monitor replacement timer. See page 38 for details.

NOTE: The Power Management

feature is On by default.

33