M a i n t e n a n c e | & | T r o u b l e s h o o t i n g |
|
|
|
WARNING: Do not drop the lamp module or touch the glass bulb! The glass may shatter and cause injury.
5Install the new lamp module.
6Tighten the screws on the outside of the module.
7Replace the lamp door and the screw.
8Plug in the power cord and press the power button to turn the projector back on.
9To reset the lamp replacement monitor timer, press the menu button, select the Setting menu, then navigate to the Lamp Age option. Press the select button, and the message “Lamp replace monitor reset” appears. Select Yes to reset the timer. See “Using the
Replacing the Batteries in the Remote Control
The life of the batteries depends on how often and how long you use the remote. Symptoms of low battery charge include erratic responses when using the remote and a reduced range of opera- tion.
Follow these steps to replace the batteries:
1Turn the remote face down in your hand.
2Slide the battery cover off the end of the remote.
3Remove the old batteries and dispose of them in an environ- mentally proper manner.
4Install two new AA alkaline batteries. Make sure you install each in the correct direction.
5Slide the battery cover back on the remote.
38
