Manuals / InFocus / Computer Equipment / Projector

InFocus LP260 manual Video Adjustments, Video Source menu

Models: LP260

1 64

Download 64 pages 37.17 Kb

Page 34

Video Adjustments

U s i n g	t h e	P r o j e c t o r

NOTE: When both the Video and S-Video jacks are connected, the S-video jack input is displayed. When both the Y-Pb/Cb-Pr/Cr and S-Video jacks are connected, the Y-Pb/Cb-Pr/Cr jack input is displayed.

Video Adjustments

Select Video mode by pressing the source button on the keypad, pressing the video button on the remote, or clicking the video icon in the menu.

Video Source menu

The projector automatically detects the signal from any con- nected video sources. If more than one source is connected, use the Video Source menu to select the desire one.

1Press the menu button, navigate to the Video Source menu, then press the select button.

The “Video Source” menu appears.

source menu

2Press the point down button and position the red arrow by the desired source.

Auto

In this mode, the projector automatically detects the incoming video source and adjusts itself to optimize performance.

Video/S-Video/Y, Pb/Cb/Cr

When more than one video source is connected and the projector cannot select the proper video source, select the desired source in the menu.

26

Image 34

InFocus LP260 manual Video Adjustments, Video Source menu

Contents

U S E R ’ S G U I D ECopyright 2000 by InFocus Corporation Wilsonville, Oregon. All rights reservedCanada Safety CertificationsFCC Warning EN 55022 WarningDeclaration of Conformity Australian Certification C-tick mark TrademarksSetting up the Projector TABLE OF CONTENTSSafety Instructions Using the ProjectorT a b l e C o n t e n t sSAFETY INSTRUCTIONS Warning Hot surface. Do not touchOr, send us an e-mail at techsupport@infocus.com Compatibility Image ResolutionINTRODUCTION Unpacking the ProjectorShipping box contents I n t r o d u c t i o nfoot connector keypad speaker focus ring connector panel air intake vent lamp coverpower air intake vent exhaust vent adjustable footUsage Guidelines WarrantyIf You Need Assistance SETTING UP THE PROJECTOR video reset audio OUT AVConnector panel S-videoConnecting a Computer Connecting a Video Player Powering up the Projector and Adjusting the Image Turning Off the Projector USING THE PROJECTOR Adjusting the ImageThe message “Keystone” appears Using the Remote Control Remote rangepoint button Remote controlselect button Point button 1 button on remote, 4 buttons on keypad Using the Keypad and Remote ButtonsPower Select buttonThis allows you to zoom a computer image. See page 25 for details Using the On-Screen Menus Computer menusComputer Adjustments System MenuPC Adjustment The number of vertical lines Select On to resize the image with a 4x3 aspect ratio Image Menu 1 Select Auto Image in the menu The “Auto Adjust Image” menu appears 2 Use the point buttons to adjust the position Position menuYou can move the image up, down, left and right using this menu 1 Select the Position menu The “Position” menu appearsScreen menu Video Adjustments Video Source menuWhen the video signal is from the Video or S-Video jack Auto Video System menuPAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N U s i n g When the video signal is from the Y, Pb/Cb, Pr/Cr jacksComponent Video Signal Format t h eScreen menu The “Video Screen” menu appearsThe “Image Adjustments” menu appears Image MenuThe contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. Press the point left button to decrease the contrast, press the point right button to increase the contrast, making the blacks appear blacker and the whites appear whiter Setting menu Display Power ManagementNOTE The Power Management feature is On by default CeilingLanguage menu Cleaning the Lens MAINTENANCE & TROUBLESHOOTINGCleaning the Fan Intake Filters M a i n t e n a n c e Replacing the Projection LampT r o u b l e s h o o t i n g Removing the lamp module Removing the lamp coverlamp cover Replacing the Batteries in the Remote Control Troubleshooting Problem The projector is not running Problem Only the start-up screen displaysProblem Image isn’t centered on the screen Problem Color or text not being projectedProblem The screen resolution is not right Problem Image is too wide or narrow for screenProblem Image is “noisy” or streaked Problem the projector displays vertical lines, “bleeding” or spotsProblem no sound Problem Lamp seems to be getting dimmerthe projector’s serial number located on the projector’s label Dimensions APPENDIX SpecificationsTemperature WeightNOTE Use only InFocus approved accessories. Other AccessoriesStandard Accessories A p p e n d iNOTE You can purchase these items by contacting your dealer or Optional AccessoriesInFocus Catalog Sales at Portable and Laptop Activation Chart mode/? for setup option Key command toKey command to ComputerA p p e n d i Key command toKey command to ComputerComputer Key command toKey command to activate portA p p e n d i Key command toKey command to ComputerUsing Video Mirroring with a PowerBook Computer A p p e n d i INDEX I n d e WARRANTY LIMITATION AND EXCLUSION LIMITED WARRANTYDISCLAIMER OF UNSTATED WARRANTIES LIMITATION OF LIABILITY Part Number