Manuals / InFocus / Computer Equipment / Projector

InFocus LP260 APPENDIX Specifications, Temperature, Humidity, Dimensions, Weight, Altitude, Lamp

Models: LP260

1 64

Download 64 pages 37.17 Kb

Page 51

APPENDIX

APPENDIX

Specifications

The projector must be operated and stored within the tempera- ture and humidity ranges specified.

Temperature
Operating	41 to 95° F (5 to 35° C)
Non-operating	14 to 140° F (-10 to 60° C)
Humidity

Operating and non-oper.	80% relative humidity, non-condensing

Dimensions

7.4 x 2.9 x 11.4 inches (18.9 x 7.5 x 29.0 cm)

Weight

5.5 lbs. (2.5 kg) unpacked

Altitude

Operating	0 to 7,500 feet (2,286 meters)
Optics

Focus Range	4.6 - 26 feet (1.4-8 m)
Lamp

Type	120-watt or 132-watt UHP lamp

Input Power Requirements

100-120VAC 2.2A;50/60Hz

200-240VAC 1.1A; 50/60Hz

43

Image 51

InFocus LP260 manual APPENDIX Specifications, Temperature, Humidity, Dimensions, Weight, Altitude, Optics, Lamp

Contents

G U I D E U S E R ’ SWilsonville, Oregon. All rights reserved Copyright 2000 by InFocus CorporationEN 55022 Warning Safety CertificationsFCC Warning CanadaAustralian Certification C-tick mark Trademarks Declaration of ConformityUsing the Projector TABLE OF CONTENTSSafety Instructions Setting up the ProjectorC o n t e n t s T a b l eWarning Hot surface. Do not touch SAFETY INSTRUCTIONSOr, send us an e-mail at techsupport@infocus.com Unpacking the Projector Image ResolutionINTRODUCTION CompatibilityI n t r o d u c t i o n Shipping box contentsair intake vent exhaust vent adjustable foot keypad speaker focus ring connector panel air intake vent lamp coverpower foot connectorWarranty Usage GuidelinesIf You Need Assistance SETTING UP THE PROJECTOR S-video reset audio OUT AVConnector panel videoConnecting a Computer Connecting a Video Player Powering up the Projector and Adjusting the Image Turning Off the Projector Adjusting the Image USING THE PROJECTORThe message “Keystone” appears Remote range Using the Remote ControlRemote control point buttonselect button Select button Using the Keypad and Remote ButtonsPower Point button 1 button on remote, 4 buttons on keypadThis allows you to zoom a computer image. See page 25 for details Computer menus Using the On-Screen MenusSystem Menu Computer AdjustmentsPC Adjustment The number of vertical lines Select On to resize the image with a 4x3 aspect ratio Image Menu 1 Select Auto Image in the menu The “Auto Adjust Image” menu appears 1 Select the Position menu The “Position” menu appears Position menuYou can move the image up, down, left and right using this menu 2 Use the point buttons to adjust the positionScreen menu Video Source menu Video AdjustmentsVideo System menu When the video signal is from the Video or S-Video jack AutoPAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N t h e When the video signal is from the Y, Pb/Cb, Pr/Cr jacksComponent Video Signal Format U s i n gThe “Video Screen” menu appears Screen menuImage Menu The “Image Adjustments” menu appearsThe contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. Press the point left button to decrease the contrast, press the point right button to increase the contrast, making the blacks appear blacker and the whites appear whiter Setting menu Ceiling Power ManagementNOTE The Power Management feature is On by default DisplayLanguage menu MAINTENANCE & TROUBLESHOOTING Cleaning the LensCleaning the Fan Intake Filters Replacing the Projection Lamp M a i n t e n a n c eT r o u b l e s h o o t i n g Removing the lamp cover Removing the lamp modulelamp cover Replacing the Batteries in the Remote Control Problem Only the start-up screen displays Troubleshooting Problem The projector is not runningProblem Image is too wide or narrow for screen Problem Color or text not being projectedProblem The screen resolution is not right Problem Image isn’t centered on the screenProblem Lamp seems to be getting dimmer Problem the projector displays vertical lines, “bleeding” or spotsProblem no sound Problem Image is “noisy” or streakedthe projector’s serial number located on the projector’s label Weight APPENDIX SpecificationsTemperature DimensionsA p p e n d i AccessoriesStandard Accessories NOTE Use only InFocus approved accessories. OtherOptional Accessories NOTE You can purchase these items by contacting your dealer orInFocus Catalog Sales at Portable and Laptop Activation Chart Computer Key command toKey command to mode/? for setup optionComputer Key command toKey command to A p p e n d iactivate port Key command toKey command to ComputerComputer Key command toKey command to A p p e n d iUsing Video Mirroring with a PowerBook Computer A p p e n d i INDEX I n d e LIMITED WARRANTY WARRANTY LIMITATION AND EXCLUSIONDISCLAIMER OF UNSTATED WARRANTIES Part Number LIMITATION OF LIABILITY