
iAPX 432 Interface Processor Architecture Reference Manual
Having established its identity, the processor proceeds to locate its processor object. It does this by assuming that the initial object table directory is located at physical mennry address 8 (see figure
As usual, an IP will generate an interrupt after it responds to the IPC message. This second interrupt following reset indicates to the IP controller software that the IP is in logical reference mode and that normal execution may begin. Note that window 4 will then be configured as defined by the attributes encoded in the IP's processor object. Since window 4 provides the data path to the function request facility, the other windows may be configured inmediately by means of the ALTER MAP AND SELECI' mTA SEGmNr function.