FUNcrIOO SUl+1ARY
SEI'PERIPHERAL SUBSYSTEM MODE (logical and Physical Mode)
Operator ID: 5
Hex Byte
Contents Function Request Facility Offset
results 0 through 9 | 1 | ||
1 reserved | 1 | ||
oper and 6 | 1 | lEH | |
1 | |||
operand 5 | 1 | ICH | |
1 | 1 | ||
operand 4 | 1 | lAH | |
1 reserved | 1 | ||
operand 3 | 1 | ISH | |
1 | 1 | ||
operand 2 | 1 | 16H | |
1 reserved |
| ||
operand I | l4H | ||
1 reserved |
| ||
operand 0 | l2H | ||
1 PS MODE |
| ||
IP function code | lOH | ||
1 002H (SEI'PS MODE) |
| ||
function state | OEH | ||
1 | 1 | ||
process selection index | 1 | OCH | |
1 | 1 | ||
| 1 |
|
SEI'PERIPHERAL SUBSYSTEM MODE allows an operation to change the mode settings for the connected peripheral subsystem, both on the processor and in the peripheral subsystem status field of the
processor data segment. The operand contains a set of new peripheral subsystem mode flags. Note that this operator is unique to 432 Interface Processors.
SET PERIPHERAL SUBSYSTEM IDDE when performed in physical rrode is of the same form and provides the same function as SEl' PERIPHERAL SUBSYSTEM mDE performed in logical rrode.