Intel S5000PSL, S5000XSL ƒStandby, ƒCriticality, ƒRearm Sensors, ƒDefault Hysteresis

Intel® Server Boards S5000PSL and S5000XSL TPS Appendix B: BMC Sensor Tables

ƒRearm Sensors

The rearm is a request for the event status for a sensor to be rechecked and updated upon a transition between good and bad states. Rearming the sensors can be done manually or automatically. This column indicates the type supported by the sensor. The following abbreviations are used in the comment column to describe a sensor:

-A: Auto-rearm

-M: Manual rearm

ƒDefault Hysteresis

The hysteresis setting applies to all thresholds of the sensor. This column provides the count of hysterisis for the sensor, which can be 1 or 2 (positive or negative hysteresis).

ƒCriticality

Criticality is a classification of the severity and nature of the condition. It also controls the behavior of the Control Panel Status LED

ƒStandby

Some sensors operate on standby power. These sensors may be accessed and / or generate events when the main (system) power is off, but AC power is present.

Revision 1.2	95
	Intel order number: D41763-003