Intel® Server Boards S5000PSL and S5000XSL TPS | Design and Environmental Specifications |
The server board is capable of supporting a minimum of one DIMM installed. However, for system performance reasons, Intel’s recommendation is that at least 2 DIMMs be installed.
The following diagram shows the recommended minimum DIMM memory configuration. Populated DIMM slots are shown in Grey.
MCH
Branch 0
Channel B |
|
|
|
|
|
|
| Channel C | |
|
|
|
|
|
|
| |||
Channel A |
|
|
|
|
|
|
|
| Channel D |
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A1 |
|
| |
DIMM | A2 |
|
|
DIMM B1 |
| ||
DIMM | B2 |
| |
| DIMM C1 |
| |
| DIMM C2 |
| |
|
| DIMM D1 | |
|
| DIMM | D2 |
|
| DIMM |
Branch 1
TP02300
Figure 13. Minimum Two DIMM Memory Configuration
Note: The server board supports single DIMM mode operation. Intel will only validate and support this configuration with a single 512 MB x8 FBDIMM installed in DIMM socket A1.
Revision 1.2 | 37 |
| Intel order number: |