Intel SE8500HW4 Revision, BIOS User Interface, Intel order number D22893-001, Table 82. FRU Information Menu, Intel® Server Board Set SE8500HW4

Intel® Server Board Set SE8500HW4					BIOS User Interface
		Table 81. COM1 Console Redirection Menu
	Setup Item	Option	Default	Help Text	Comment
	BIOS Console	Enabled/	Disabled	Enables performing server
	Redirection	Disabled		management tasks over
				the serial port.
	Flow Control	None	None	Selects serial port
		RTS/CTS		communication protocol
				handshaking type.
		XON/XOFF
		CTS/RTS + CD
	Baud Rate	9600/19.2K/38.4	19.2K	Selects serial port
		K/57.6K/115.2K		transmission speed. The
				speed must be matched on
				the other side. Long or
				noisy lines may require
				lower speeds.
	Terminal Type	VT100/	VT100+	VT100/VT100+ selection
		VT100+/		only works with English
				language. VT-UTF8 uses
		VT-UTF8/
				Unicode. PC-ANSI is the
		PC-ANSI
				standard PC-type terminal.

Table 82. FRU Information Menu

	Setup Item	Option	Default	Help Text	Comment
	Board Part	<string from			Info Only
	Number	the FRU>
	Board Serial	<string from			Info Only
	Number	the FRU>
	System Part	<string from			Info Only
	Number	the FRU>
	System Serial	<string from			Info Only
	Number	the FRU>
	Chassis Part	<string from			Info Only
	Number	the FRU>
	Chassis Serial	<string from			Info Only
	Number	the FRU>
	BMC Device ID	<string from		Device identification number	Info Only
		the BMC>		of the Baseboard
				Management Controller
	BMC Firmware	<string from			Info Only
	Revision	the BMC>
	BMC Device	<string from			Info Only
	Revision	the BMC
	PIA Revision	<string from			Info Only
		the BMC>
	SDR Revision	<string from			Info Only
		the BMC>
	Hot Swap	<string from		Revision of the Hot Swap	Info Only
	Controller	the Hot Swap		Back Plane (HSBP) controller
Revision 1.0					107

Intel order number D22893-001