SQ599

Standard CMOS setup

This setup page includes all the items in a standard compatible BIOS. See Page 13 to Page 17 for details.

BIOS Features setup

This setup page includes all the items of Award special enhanced features. See Page 17 to Page 21 for details.

VGA Memory setup

This setup page tell you how to select VGA memory by 1MB or 2MB. See Page 22 for detail.

Power Management setup

This category determines how much power consumption for system after selecting below items. Default value is Disable. See Page 23 to Page 28 for details.

PCI Configuration setup

This category specifies the bale (in units of PCI bus clocks) of the latency timer for this PCI bus master and the IRQ level for PCI device. See Page 28 to Page 30 for details.

Load setup defaults

Chipset default indicates the values required by the system for the maximum performance. The OEM manufacturer may change to default through MODBIN before the binary image burn into the ROM.

Password setting

Change, set, or disable password. It allows you to limit access to the system and Setup, or just to Setup. See Page 30 to Page 31 for details.

IDE HDD auto detection

Automatically configure hard disk parameters. See Page 31 to Page 32 for details.

Save & exit setup

Save CMOS value changes to CMOS and exit setup.

Exit without save

Abandon all CMOS value changes and exit setup.

12

Page 12
Image 12
Intel SQ599 Standard Cmos setup, Bios Features setup, VGA Memory setup, Power Management setup, PCI Configuration setup