SQ599
7.Go through the whole instructions, and the system would start with the desired display setting.
AutoCAD R12 Setup
1.The following procedures assume that
(1)You have complete "unpack & copy" procedure.
(2)Your SiS ADI 4.2 drivers are located in C:\ADI42.
(3)Your AutoCAD R12 program is located in C:\ACADR12.
(4)Your AutoCAD R12 default drivers are located in C:\ACADR12\DRV.
(5)Your AutoCAD R12 configure file ACAD.CFG is located in C:\ACADR12.
2.Copy the following driver file to C:\ACADR12\DRV:
RCPSIS.EXP
You may complete this step by
COPY C:\ADI42\RCPSIS.EXP C:\ACADR12\DRV
3.Delete your original ACAD.CFG file. You may complete this step by
DEL C:\ACADR12\ACAD.CFG
4.Restart your AutoCAD R12 program as usual.
5.AutoCAD R12 will ask you to complete the configuration procedures since it can't find the configure file ACAD.CFG.
6.Follow the instructions of AutoCAD R12 to proceed configuration.
7.In "Available Video Displays:" item,
choose the "SiS Super VGA ADI v4.2 Display and Rendering driver" item.
8.In "Select Display Resolution" screen, choose display driver you want to use.
AutoShade R2.0 Setup
1.The following procedures assume that
(1)You have complete "unpack & copy" procedure.
(2)Your ADI 4.2 drivers are located in C:\ADI42.
2.Add the following settings to your batch file for AutoShade R2.0 (say SHADE2.BAT) or to your "AUTOEXEC.BAT" file.
(a) For display driver setting,
SET DSPADI=\ADI42\RCPSIS.EXP
(b) For rendering driver setting,
SET RDPADI=\ADI42\RCPSIS.EXP
3.Delete the configure file SHADE.CFG.
4.Type
SHADE2 <Enter>
to
5.While prompting "Select display device:",
choose "P386 AutoDesk Device Interface display driver.".
45
