Intel SQ599 manual 4-9Password Setting

SQ599

SLOT2	determine the location of the PCI
PCI-	IDE device
SLOT3	(See below item)
ISA	PCI-SLOT1
	PCI-SLOT2
	PCI-SLOT3
	− assign IRQ 14 for primary IDE INT#
	IRQ 15 for secondary IDE INT#
	for the specified slot

ISA

−The BIOS will not assign any IRQs even if PCI IDE card is found!

Because some IDE cards connect the IRQ 14 & 15 directly from ISA slot thru a cord. (This cord is called Legacy Header)

F. Primary IDE INT#	A	To tell which INT3 does the PCI IDE card
Secondary IDE INT#	B	is using for its interrupts

Remarks: Master Arbitration Protocol, CPU->PCI Mem Post Write Buf, CPU->PCI Memory Burst Write, and PCI Master Burst Read/Write please see the

reference: Chipset Data Sheet.

4-9 Password Setting

When you select this function, the following message will appear at the center of the screen to assist you in creating a password.

ENTER PASSWORD:

Type the password, up to eight characters, and press <Enter>. The password typed now will clear any previously entered password from CMOS memory. You will be asked to confirm the password. Type the password again and press <Enter>. You may also press <Esc> to abort the selection and not enter a password.

31