S o l v i n g P r o b l e m s

BE-BAR CODE ERROR

Incorrect or insufficient bar code definition. The bar code must be specified with five values. See Section 4.

E2-PERMANENT MEMORY CHECKSUM ERROR, FACTORY DEFAULTS SET

This message indicates that the non-volatile memory has been corrupted. The Intermate LX T-04 is automatically set to factory default state (your configuration is lost). If the message does not re-appear after power-off/power-on, configure the Intermate LX T-04. See Section 3.

This message also appears as a normal consequence of a change between laser and matrix emulation.

E6-MEMORY OVERFLOW: FREE STRING AREA EXHAUSTED

The available string area is exhausted. You must remove some strings from your configuration. The size of the available string area is printed in the Parameter List header, and is also displayed in all string programming menus.

F1-TWINAX TRANSCEIVER ERROR

Hardware error. Contact you dealer/distributor.

I n t e r m a t e L X T - 0 4

47

Page 47
Image 47
Intermate LX T-04 manual Hardware error. Contact you dealer/distributor