A p p e n d i c e s
I n t e r m a t e L X T - 0 4 61
D. Updating the Software
Software that can be Updated
The Intermate LX T-04 software held in Flash ROM.
A specific cable is needed to upgrade the firmware.
Checking if an update is available
Contact your dealer to check if a new firmware release is available. You should
have the printer's current firmware release number ready to compare against the
latest software release from LCI Intermate A/S.
Alternatively you can visit the Intermate web site:
http://www.intermate.com
Here you can download the latest firmware version.
Updating the Intermate LX T-04 Flash ROM
You can carry out an update to your Flash ROM through the parallel printer
port of the Intermate LX T-04.
How to update the firmware
Note: If the LX T-04 is attached to the system and operating, then the
current address switch position represents the device address
assigned to the LX T-04. Write this number down and save it.
1. Power Off the printer.
2. Disconnect the LX T-04 from the system, ie remove the cable inserted in
the DB9 connector.