S o l v i n g P r o b l e m s
4.Has the print job been released from the host?
Check that Vary On has been made and that the print job has been released from the print queue. Ask your System Manager.
5.Is the twinax line terminated?
The last unit on the twinax line must be terminated. Check that all units along the twinax line are installed correctly and that the termination is correct.
6.Are any cables broken?
Check that the cables are properly connected and fully functional.
Reporting Problems
If you run into problems that you can't solve on your own, it is important that you make an error report for your System Manager or distributor. The error report should include:
A printout with a description of the errors.
If possible, a correct printout.
A Parameter List.
A System and ASCII hexdump.
If you need technical support, please contact your dealer. If they can't help you, they forwards your request through the appropriate channels.
Printing the Parameter List
The Parameter List shows the complete configuration. A selection of parameters are described in Appendix A. To print the Parameter List, do as follows:
44 | U s e r ‘ s G u i d e |
