Jenn-Air 8113P754-60 Oven Cooking, Control Panel, Quickset Pads, Setting the Clock

OVEN COOKING

Control Panel

A B C DEFGH

I J K L M N O P

The control panel is designed for ease in programming. The display window shows options for each function and moves from step to step through the programming process. Control panel features vary by model. Oven display above is programmed for a bake operation.

A	Rapid Preheat	Use to decrease preheating time.
B	Convect	Use for convection baking and roasting.
C	Bake	Use for baking and roasting.
D	Broil	Use for broiling and top browning.
E	TIMER 1	Sets timer.
F	Display	Displays oven functions, options and
		window time of day.
G	TIMER 2	Sets timer.
H	Number Pads	Use to enter time and temperature,
		or to enter Favorites names.
I	Favorites	Use to access, program or save
		baking cycles.
J	More Options	Use to access additional features.
K	Clean	Use to set self-clean cycle.
L	Setup	Use to view or change factory
		default settings.
M	Vent Fan	Activates the ventilation fan on
		the cooktop.
N	Oven Light	Use to turn the oven light on or off.
O	CANCEL	Cancels all operations except Timer,
		Clock, Favorites and Setup.
P	Quickset pads	Use to select options in display
		window (next to display window
		on both sides).

Quickset Pads

Quickset pads are located on each side of the display window and are used to select the desired function or option in the display window. To select the option or function, press the Quickset pad next to the word.

If you need to back out of a function or option in the display, press the Back pad. When your programming is complete, press the Enter pad or wait four seconds and the function will start automatically.

Up arrows indicate additional screens with additional options. Press the Quickset pads next to the arrows to scroll through the display.

Important: Four seconds after entering the function, option, number or letter, the function will automatically be entered. If more than 30 seconds elapse between steps in programming, the function will be canceled and the display will return to the previous display.

Clock

Setting the Clock:

1. Press the Setup pad.

2.Select CLOCK using the Quickset pads.

3.Select TIME.

4.Enter the time using the number pads.

5.Press Enter pad.

6.Select AM or PM in 12 hour mode. (For 24 hour clock, see page 18.)

7.To exit the Setup mode, press Setup pad.

17