Jenn-Air T2 Maintenance, Oven Door, Oven Window, Leveling Legs, Electrical Connection, Oven Light

MAINTENANCE

OVEN DOOR

CAUTION:

•Do not place excessive weight on or stand on an open oven door. This could cause the range to tip over, break the door, or injure the user.

•Do not attempt to open or close door or operate oven until door is properly replaced.

•NEVER place fingers between hinge and front oven frame. Hinge arms are spring mounted. If accidentally hit, the hinge will slam shut against oven frame and could injure your fingers.

TO REMOVE:

1.When cool, open the oven door to the first stop position (opened about four inches).

2.Grasp door at each side. Do not use the door handle to lift door.

3.Lift up evenly until door clears hinge

arms.

TO REPLACE:

1.Grasp door at each side.

2.Align slots in the door with the hinge arms on the range.

3.Slide the door down onto the hinge arms until the door is completely seated on the hinges. Push down on the top corners of the door to completely seat door on hinges. Door should not appear crooked.

NOTE: The oven door on a new range may feel “spongy” when it is closed. This is normal and will decrease with use.

OVEN WINDOW

TO PROTECT THE OVEN DOOR WINDOW:

1.Do not use abrasive cleaning agents such as steel wool scouring pads or pow- dered cleansers as they may scratch the glass.

2.Do not hit the glass with pots, pans, furniture, toys, or other objects.

3.Do not close the oven door until the oven racks are in place.

Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later date.

LEVELING LEGS

CAUTION:

•Be sure the anti-tip bracket secures one of the rear leveling legs to the floor. This bracket prevents the range from accidentally tipping.

The range should be leveled when installed. If the range is not level, turn the plastic leveling legs, located at

each corner of the range, until range is level.

ANTI-TIP BRACKET

LEVELING LEG

ELECTRICAL

CONNECTION

Appliances which require electrical power are equip-

ped with a three-prong grounding plug

which must be plugged directly into a prop- erly grounded three-hole 120 volt electrical outlet.

Always disconnect power to appliance before servicing.

The three-prong grounding plug offers pro- tection against shock hazards. DO NOT

CUT OR REMOVE THE THIRD

GROUNDING PRONG FROM THE POWER CORD PLUG.

If an ungrounded, two-hole or other type electrical outlet is encountered, it is the personal responsibility of the appli- ance owner to have the outlet re- placed with a properly grounded three-hole electrical outlet.

OVEN LIGHT

CAUTION:

•Disconnect power to range before replacing light bulb.

•Use a dry potholder to prevent pos- sible harm to hands when replacing bulb.

•Make sure bulb is cool before touching bulb.

•Do not touch hot bulb with a damp cloth as this may cause the bulb to break.

BULB COVER

WIRE

RETAINER

TO REPLACE OVEN LIGHT BULB:

1.When oven is cool, hold bulb cover in place, then slide wire retainer off cover. NOTE: Bulb cover will fall if not held in place while removing wire retainer.

2.Remove bulb cover and light bulb.

3.Replace with a 40 watt appliance bulb.

4.Replace bulb cover and secure with wire retainer.

5.Reconnect power to the range. Reset clock.

20