E-20
ON-SCREEN DISPLAY
On-screen display
Besides E-E images and playback images, the monitor connected to the VIDEO OUTPUT terminals
(VIDEO LINE OUT, Y/C OUT, COMPONENT OUT and HDMI OUT) provides the following on-screen
information.
On-screen display Description Operation
Status display Displays the setting status of the VCR
operation mode, date/time, counter.
Settings can be performed with DIS-
PLAY in the DISPLAY Menu screen.
ON : Always display. According to
each event or error, the event
and alarm displays are
shown for about 3 seconds.
AUTO:It displays for about 4 sec-
onds during mode changes.
OFF : No on-screen display. The
alarm display is shown
according to errors, which
occurred.
Event display Displays the operating status of blank
search, index recording/search.
Alarm display Displays error/alarm messages for
incorrect operation or improper condi-
tion of BR-HD50.
Warning display When an error occurred with the VCR,
it displays warnings with the relevant
error codes. (XPage80)
It is displayed automatically when an
error with the VCR occurred.
Menu display Displays the menu setting screen.
(XPage64)
When BR-HD50 enters the STOP/
STILL mode or no cassette tape is
loaded, the menu is displayed when
the MENU button is pressed.
Multi Cue-up screen Displays the Multi Cue-up screen for
registering or selecting cue-up
(searching) point. (XPage56)
When BR-HD50 enters the STOP,
STILL or PLAY mode, press the Cue-
up button to display the Multi Cue-up
screen.
VIDEO OUTPUT
Monitor
E-21
ON-SCREEN DISPLAY
Status display
Status display: It displays the current settings and operating status.
No. Item Description
1The 1 display contents differs between DV format and HDV format.
DV format
Sampling frequency/audio
output CH
Memo
If the counter display position
is set to the upper left, this item
will be displayed on the lower
right.
•DV
Displayed when recording or playing back a tape with
video in DV format.
•Sampling frequency
While recording an analog audio signal, the setting value
of AUDIO MODE: DV in the AUDIO Menu screen is dis-
played (32kHz or 48kHz).
During playback, the sampling frequency of the sound
recorded on the tape is displayed (32kHz, 48kHz, 44.1kHz).
During HDV/DV signal input, the sampling frequency of the
sound input is displayed.
•A.LOCK
Lights up when the video and audio sampling clocks (at
48kHz) are synchronized in the PLAYBACK mode.
Always lights up in the RECORDING mode and EE mode.
•Audio output channel
The audio channel output from the AUDIO OUT terminal is
displayed (CH-1/2, CH-3/4, MIX). (only in 32kHz mode)
•With A/V INFO. in the DISPLAY Menu screen, whether to
display this item can be selected.
HDV format
HDV format display
Displayed when recording or playing back a tape with video in
HDV format. HDV format details are displayed.
HDV-HD30P: 720/30p signal
HDV-HD25P: 720/25p signal
HDV-HD24P: 720/24p signal
HDV-SD60P: 480/60p signal
HDV-SD50P: 576/50p signal
Note
Does not support tapes in 576/26p mode from the GR-PD1
camera. Displays HDV-SD50p when playing back the tape.
HDV HD30P–SP20
min
06/10/ 05 STANDBY
-
OFF
11:20:00 TCR 02:00:00:00
1
3DV 2K CH–1 / 2 SP 2 0
min
W
ARNING 7001
DRUM MOTOR FAILURE
REC INHIB IT
06/10/ 05 STANDBY
-
OFF
11:20:00 TCR 02:00:00:00
1
DV format HDV format