JVC BR-HD50 manual Date/time, Counter display, VCR operation mode, Remaining tape

ON-SCREEN DISPLAY

Status display (continued)

			D V 3 2 K C H – 1 / 2				S P 2 0 m i n		5
					W A R N I N G 7 0 0 1
				D R UM MO T O R F A I L U R E
					R E C	I N H I B I T
									4
			0 6 / 1 0 / 0 5				S T A N D B Y -O F F
			1 1 : 2 0 : 0 0			T C R 0 2 : 0 0 : 0 0 : 0 0
	2						3
No.		Item						Description
2	Date/time			•	It displays the date and time (HR:MM:SS).
				•	When the unit is in the Analog/HDV Signal RECORDING
		Memo
					or STOP mode, it displays the data of the built-in clock.
	If the display position of the
				•	During playback, fast-forwarding or rewinding, the data
	counter is set to the lower left,
	this item will be displayed on				recorded on the tape is displayed.
				•	During DV signal recording, the data from the IEEE1394
	the lower right.				terminal is displayed. If the REC button is pressed in the
					STOP mode, the input data from the IEEE1394 terminal
					will be displayed.
				•	The style for displaying the date and time can be selected
					with DATE STYLE and TIME STYLE in the DISPLAY Menu
					screen.
					When TIME STYLE is set to 12H, the display symbols of
					the hours, minutes, and days change as follows for AM
					and PM.
					AM = dot (.)		PM = colon (:)
				•	Whether to display date/time and the type of display can
					be selected with TIME/DATE in the DISPLAY Menu
					screen.
				•	When the data/time is not set or when a tape is played with
					no date/time data recorded, “– –” will be displayed.

No.	Item					Description
3	Counter display	Displays the CTR counter, time code or user’s bit. The dis-
		played contents can be selected using the COUNTER switch.
		•	CTL counter:			It will be displayed if the COUNTER switch
						is set to CTL. The counter shows a 7-digit
						number (hour, minute, second and frame)
						with + or – and “CTL” at the beginning, e.g.,
						CTL-9:30:20:10
		•	Time code :			It will be displayed if the COUNTER switch
						is set to TC. The time code shows an 8-digit
						number (hour, minute, second and frame).
						At playback, the time codes recorded on the
						tape are displayed.
						The prefix indicates the time code mode.
		TCG		:	Time code generator data
		TCR		:	Time code reader data
		DTCG: Time code data received from the IEEE1394 terminal
					(In DV mode)

Depending on the framing mode, the symbols for the seconds and frames are different (only for NTSC).

00 : 00 : 00	:	00	Dot (.) for the drop frame mode
			Colon (:) for the non-drop frame mode

• User’s bit : it will be displayed if the COUNTER switch is set to UB.

The user’s bit is an 8-digit number (each digit is a number or character from 0 – F). The prefix indicates the user’s bit mode.

UBG : User’s bit generator data

UBR : User’s bit reader data

DUBG: User’s bit reader data received from the IEEE1394 terminal (In DV mode)

					Memo
				z		of the counter display can be changed with
					The position
					COUNTER POSI in the DISPLAY Menu screen.
				z The counter display can be turned on/off with TIME CODE
					in the DISPLAY Menu screen.
4	VCR operation mode			Displays the VCR operation mode, including:
				PLAY, EJECT, FF, REW, STANDBY-ON, STANDBY-OFF,
				STILL, REC, REC PAUSE, SHTL (shuttle search), JOG,
				BLANK SRH (blank search), NO CASSETTE (cassette tape
				not loaded), OPERATE OFF.
				For SHTL and JOG, the speed is also displayed.
				• The display can be turned on/off with VTR MODE in the
					DISPLAY Menu screen.
5	Remaining tape			Displays the remaining time of tape (minutes).
				Not displayed when the remaining time is being confirmed.
		Memo
	If		display position	• The display can be turned on/off with TAPE REMAIN in the
		the counter
	is set to the upper right, this				DISPLAY Menu screen.
				• The SP display disappears when a DVCAM cassette tape
	item will be displayed on the				is being played back.
	lower right.
				• This remaining tape time display is only for reference.

E-22 E-23