JVC BR-HD50 Index search, Blank search, Repeat operation

E-54

PLAYBACK

Search function

This function searches to the position where the index signal is recorded.

Set “Q,S” KEY FUNC in the SYSTEM [1/2] Menu screen

to INDEX.

To search an index point in the forward direction

from the current tape position:

•Press the SEARCH+ button.

The index position to be searched can be specified by the

number of times this button is pressed. (Max: 99)

To search an index point in the reverse direction

from the current tape position:

•Press the SEARCH– button.

The index position to be searched can be specified by the

number of times this button is pressed. (Max: 99)

When the SEARCH+ or SEARCH– button is pressed,

the unit fast-forwards or rewinds to the specified

indexed position and start playing.

Memo

zIf the interval between index signals is less than one minute, the

function may not work well.

zThe specifications for index signal recording varies with the

device used.

This function searches unrecorded parts of the tape.

In the STOP mode, press the BLANK button.

J•If the current position is at a recorded part of the tape, BR-

HD50 fast-forwards until an unrecorded part is reached

and stops there.

•If the current position is an unrecorded part of the tape,

BR-HD50 will first advance the tape in the forward direc-

tion for confirmation and thereafter rewind and go into the

STILL mode at the last recorded position.

•During a blank search, “BLANK SEARCH” is displayed on

the monitor.

Index search

Setting

Operation

Blank search

INDEX+1

Monitor screen

Index search progressing:

displayed on the screen

(The number denotes the corre-

sponding index position.)

– button

+ button

BLANK SEARCH

Monitor screen

BLANK button

E-55

PLAYBACK

Repeat playback

Three types of repeat playback are available for BR-HD50.

The repeat playback function can be set with REPEAT MODE in the SYSTEM [1/2] Menu screen.

REPEAT MODE in the SYSTEM [1/2] Menu screen

OFF : No repeat playback.

INDEX : Repeat playback between positions where index

signals are recorded.

V. END : Repeat playback from the beginning of the tape to

the position where recording of video signals

ends.

TAPE END : Repeat playback from the beginning to the end of

the tape.

1.Press the REW button to rewind the tape to the beginning.

2.Press the PLAY button to start playback.

JWhen it reaches the position set at REPEAT MODE, the tape

starts rewinding and plays back again.

To abort the repeat playback function, press the

STOP button.

Setting

Operation

Repeat operation

KCABEGAP

EGAPTXEN

XEDNIEDOMTAEPER

VCER/RAV.CNUFYEK”,“

FFO-YBT

EDOMESUAPGNOL

CES30EMITESUAPGNOL

FFOVD:CER

NI5MEMITP.GNOC LER

PUKCAB

VD:VDA.F/LTS

–––]2/1[METSYS––

–

SYSTEM [1/2] Menu screen

Memo

If the head is dirty, repeat play-

back may not work well.

INDEX repeat playback

zIf no index signal is

detected during playback,

the tape will run until the

end. If no index signal is

detected during rewind, the

tape will rewind until the

beginning.

zIf the interval between

index signals is less than

one minute, the function

may not work well.

TAPE END

V. END

PlaybackINDEX

Rewind

Index signal Index signal

Beginning of tape End of tape