E-80
OTHERS
Warning display (continued)
Warning di splay (Displayed regardless of the DISPLAY mode)When a warning display appears, BR-HD50 stops operation and ceases to accept any operation
command. When TAPE DEFECTIVE (5605 - 5609) is displayed, the unit similarly stops all opera-
tions except EJECT operation.
Memo
This unit uses a microcomputer. It may not function correctly if there is external noise. If this happens,
please turn off the power and then on again.
Display Status Action
WARNING 0201
CONDENSATION ON
DRUM
Condensation. Leave the power on and wait for the
display to disappear.
WARNING 3200
LOADING FAILURE
Unable to load tape. This error can be resolved by turning
off and then on the power. However,
doing so may damage the tape in
some cases. Consult your JVC
authorized dealer.
WARNING 3300
UNLOADING FAILURE
Unable to eject tape.
WARNING 4100
CASSETTE EJECT
FAILURE
Eject error. Is a heavy object on the unit?
DEFECTIVE TAPE!
5605 - 5609
Broken tape. Press the EJECT button to remove
and replace the tape.
WARNING 5702
TAPE END DET.
ERROR!
Tape-end sensor error. This error can be resolved by turning
off and then off the power. However,
doing so may damage the tape in
some cases. Consult your JVC
authorized dealer.
WARNING 5802
TAPE BEGIN DET.
ERROR!
Tape-beginning sensor error.
WARNING 7001
DRUM MOTOR
FAILURE
Drum rotation error.
WARNING 7101
CAP MOTOR FAILURE
Capstan rotation error.
WARNING 7202 - 7203
SUPPLY REEL
FAILURE
Supply reel rotation error.
WARNING 7302 - 7303
TAKE UP REEL
FAILURE
Take up reel rotation error.
WARNING 7305
TAKE UP REEL
FAILURE
Tape winding error during unloading.
WARNING 7401
REEL MOTOR
FAILURE
Reel motor rotation error.
E-81
OTHERS
Troubleshooting
Symptom Action
No power. Is the AC adapter correctly connected?
Unable to record. Is the slide of the cassette tape turned to “REC”?
Set it to “REC” if it is at the “SAVE” position.
The operation buttons of BR-HD50
do not work.
Is OPERATION LOCK of the SYSTEM [2/2] Menu set to ON?
Set it to OFF if the operation buttons are to be used.
For REMOTE, select the buttons that can be operated with the
LOCAL FUNCTION Menu.
Editing cannot be controlled even
after the REMOTE/LOCAL switch
is set to REMOTE.
To cont rol with RS-422A, set REMOTE SEL 9P in the REMOTE
[1/2] Menu screen to “ON”.
Noise is produced on the playback
video.
Playback sound interrupted.
•The tape is damaged.
Replace the tape.
•The head is dirty.
Clean it with the specified head-cleaning tape. (XPage9)
Cannot play back. Is the setting for PB TAPE FORMAT in the SYSTEM [2/2] Menu
screen something other than AUTO?
Playback is not available when this menu item does not match
the tape format.
Time codes are not correctly
recorded during DV signal input.
Is TC DUPLI.: DV in the TC/UB/CLOCK [1/2] Menu screen cor-
rectly set up?
Unable to turn on the power with
the OPERATE button.
Isn’t the REMOTE/LOCAL switch set to REMOTE when
LOCAL FUNCTION in the REMOTE [1/2] Menu screen is not
set to ALL KEYS?
SERIAL REMOTE control does not
function.
Isn’t REMOTE SEL SER in the REMOTE [1/2] Menu screen set
to OFF?
For SERIAL REMOTE control, set it to ON or LOC+REM.
Unable to operate BR-HD50 with
the IEEE1394 terminal.
•Isn’t REM SEL HDV/DV in the REMOTE [1/2] Menu screen
set to OFF? To operate with the IEEE1394 terminal, set it to
ON or LOC+REM.
•When the controlling equipment (non-linear editor, etc.) does
not recognize this unit, either reconnect the IEEE1394
cable, or reset the power to the unit.