JVC GM X50U manual External Speaker Connection

External Speaker Connection

External speakers

(Ex. TS-C500SPG)

Note:

ENGLISH

· ª

When using external speakers, set this to

· ª

It is recommended to use the speaker unit—TS-C500SPG (not supplied) as the external speakers. You can also connect any speakers of the following specifications:

• Impedance: Between 6 Ω

and 8 Ω

• Power handling capacity:

More than 3 W

To speaker

input terminals

How to connect the cords

EXTERNAL.	To speaker
	input terminals

Ferrite core (supplied)

Attach the supplied ferrite cores to the speaker cords when using external speakers. Attach the ferrite cores as near to the SPEAKER OUT L/R terminals on the rear panel of the Monitor as possible.

How to attach the ferrite core

Caution:

• Do not short-circuit the 9 and ( speaker cords each other. (Refer also to the instructions supplied with the speaker unit when connecting speakers.)

Connecting the External Cooling Fan Unit

When installing this Monitor vertically, it is required to attach the external cooling fan unit (not supplied).

Notes:

•When installing this Monitor vertically, it is also required to set the speed of the internal cooling fan to “HIGH” (see page 25).

•If you install the Monitor in such a way not instructed in this manual (for example, installing it diagonally), the cooling fan unit may not be able to cool down the internal heat enough to make the Monitor operate; therefore, reinstallation or another method for cooling will be required. Consult your dealer in such a case.

•For more detailed connection, refer to the manual supplied with the external cooling fan unit.

Cooling Fan Unit: TS-C01FANG (not supplied)

OPTION

Cooling Fan Unit: TS-C01FANG (not supplied)

13