Basic Operations
Rear View
1
POWER
OFF POWER ON
DISPLAYASPECT
DISPLAY
| INPUT SELECT | ||
3 | A | COMPO. | |
/(RGB B) | |||
| |||
VIDEO |
| ||
| B | RGB A | |
| MUTING | VOLUME | |
MUTING
MENU/EXIT
2
4
Daily Operations
1 Turn on the main power.
Set the POWER switch on the rear of the Monitor to “(on)”.
The power lamp on the upper left of the front panel lights orange.
•If you have turned off the Monitor not by using
POWER ON on the remote control (or 
on the front panel), but by using the POWER switch, setting the power switch to “(on)” lights the power lamp green and turns the Monitor on.
2 Turn on the power.
Press POWER ON on the remote control to turn the power on.
The power lamp lights green.
•You can also use 
on the front panel (lower right) to turn on the Monitor.
3 Select an input.
Select the desired input by pressing INPUT SELECT (VIDEO A, VIDEO B, COMPO./(RGB B) and RGB A).
•You can also select the input by pressing INPUT on the Monitor. Each time you press the button, the input mode changes in sequence.
VIDEO A |
|
|
|
|
|
| VIDEO B | ||
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RGB A |
|
|
|
| COMPONENT or RGB B | ||||
|
|
|
| ||||||
Ex. When selecting “VIDEO A” input
V I D E O A
N T S C
Input selected
Input video signal
Note:
•To select “COMPONENT” or “RGB B,” you need to set the “COMPO./RGB B” setting correctly.
4 Adjust the volume.
V O L U M E: 1 0
– | + |
Note:
•While no menu is displayed, you can adjust the volume by pressing 2 / 3 on the Monitor.
To turn off the volume immediately
Press MUTING.
“MUTING ON” is displayed, and the sound goes out. Pressing the button again resumes the previous volume level.
To make the screen indication appear
Press DISPLAY.
The types of input and signal are indicated on the screen for about 3 seconds.
You can also make the screen indication appear using menus (page 22).
14
