Parts Identification (Continued)

Monitor: Rear Views 2

1

2

 

3

 

 

 

OPTION

SPEAKER OUT

 

 

 

 

 

R

L

 

 

 

 

 

 

EXTERNAL INTERNAL

 

 

 

4

 

 

5

6

7

8

AUDIO

 

 

 

OUT

 

 

 

 

 

MAKE

L

 

 

 

 

 

 

 

 

IN

 

RS-232C

WIRED

R

 

 

RGB A

 

REMOTE

AUDIO

AC IN

POWER

 

 

1OPTION terminal (page 13)

Connect the power cord of the Cooling Fan Unit (not supplied) when installing the Monitor vertically.

2SPEAKER OUT L/R terminals (page 13)

Connect external speakers, such as unique JVC speakers (not supplied), etc.

3INTERNAL/EXTERNAL (built-in speaker/external speaker) selecting switch (page 13)

INTERNAL:

To use built-in speakers.

EXTERNAL:

To use external speakers.

4RGB A input terminals (page 12)

Input terminal (D-sub, 15 pin)

Connect to the video output terminal of a personal computer.

Note:

Use a cord as short as possible when connecting a personal computer to this terminal. (Recommended length is within 3 m.)

AUDIO IN terminal (stereo mini jack)

Connect to the audio output terminal of a personal computer.

5REMOTE terminals (page 12)

RS-232C terminal (D-sub, 9 pin)

Connect to the RS-232C terminal of a personal computer. For the control method using this terminal, consult an authorized JVC dealer.

MAKE terminal (mini DIN, 4pin)

Connect an external control unit. (See page 12.)

WIRED terminal (stereo mini jack)

Connect a wired remote control unit to this terminal.

Note:

Control signals through the MAKE terminal have priority over those through the other REMOTE terminals.

6AUDIO OUT terminals (pin jack) (page 12)

Connect to the audio input terminals of external equipment such as an amplifier.

7AC IN terminal (page 12)

Connect the supplied power cord to this terminal.

8POWER switch (page 14)

When this switch is set to “(on),” you can turn on and

off (on standby) the Monitor by using the POWER button

on the remote control or the button on the Monitor.

6

Page 51
Image 51
JVC GM X50U manual Option terminal