JVC GM X50U manual Remote Control

Remote Control

12

RM–C579 REMOTE CONTROL UNIT

RM–C579 REMOTE CONTROL UNIT
OFF	3	OFF POWER	ON
	POWER ON
DISPLAY	ASPECT	DISPLAY	ASPECT

INPUT SELECT		4		9
A	COMPO.
	/(RGB B)
VIDEO			INPUT SELECT
B	RGB A
				COMPO.
MUTING	VOLUME		A
		5		/(RGB B)
			VIDEO
			B	RGB A
			MUTING	VOLUME

MENU/EXIT 6 p

7

8

MENU/EXIT

ENGLISH

1Remote control cable jack (page 12)

Connect the remote control cable (not supplied) when using this remote control as a wired remote control.

2Remote signal transmission window

3POWER ON/OFF button (page 14)

Use this button to turn on and off (on standby) the Monitor when the POWER switch on the rear of the Monitor is “(on).”

4DISPLAY button (page 14)

Use this button to display the input terminal, color system (for VIDEO A or VIDEO B input), scan system (for COMPONENT input) and horizontal/vertical frequency (for RGB A and RGB B input).

5INPUT SELECT (VIDEO A, VIDEO B, COMPO./(RGB B) and RGB A) buttons

(page 14)

Use these buttons to switch between inputs.

To select the COMPONENT or RGB B input, you have to set “COMPO./RGB B” correctly on the menu (see page 20).

6MUTING button (page 14)

Use this button to turn off the volume immediately. Pressing the button again will resume the previous volume level.

72 / 3 / 5 / ∞ buttons

Use these buttons to select menu items or make adjustments.

8MENU/EXIT button

Use this button to display or erase menus.

While a sub-menu is displayed, pressing this button will move you one screen back to the preceding menu.

9ASPECT button (page 15)

Use this button to switch between aspect ratios. Each time you press the button, the aspect ratio changes as follows:

REGULAR FULL

PANORAMIC ZOOM

pVOLUME + / – buttons (page 14)

Use these buttons to adjust the volume level.

7