JVC GM X50U manual Bright

Models: GM X50U

1 128
Download 128 pages 8.57 Kb
Page 34
Image 34

PICTURE ADJ. (Picture adjustment): See page 16.

CONTRAST

Adjusts the contrast of the picture.

BRIGHT

Adjusts the brightness of the picture.

CHROMA*1

Adjusts the color density of the picture.

PHASE*2

Adjusts the color phase.

SHARPNESS

Adjusts the outlines of the picture.

sub menu

Displays the fine adjustment bar.

reset

Resets the Picture Adjustment Menu settings to defaults.

SIZE/POSITION ADJ. : See page 17.

H SIZE

Adjusts the horizontal screen size.

H POSITION

Adjusts the horizontal screen position.

V SIZE

Adjusts the vertical screen size.

V POSITION

Adjusts the vertical screen position.

DOT CLOCK*3

Adjusts to eliminate stripes or flickering. Use with “CLOCK PHASE.”

 

Normally, no adjustment is needed.

CLOCK PHASE*3

Adjusts to eliminate stripes or flickering. Use with “DOT CLOCK.”

 

Normally, no adjustment is needed.

sub menu

Displays the fine adjustment bar.

reset

Resets Size/position Adjustment Menu settings to defaults.

FUNCTION SELECT: See pages 19 to 21.

COLOR TEMP.

Adjusts the color temperature.

 

Use when the picture is reddish or bluish.

ASPECT*4

Selects the horizontal to vertical ratio of the screen.

SIGNAL MODE*5

• Selects a color system (NTSC, PAL M, PAL N) when VIDEO A or VIDEO B input is selected.

 

Normally, set to “AUTO.”

 

• Selects a scan system—480i, 576i, 480p, 576p, 720/60p, 720/50p, 1080/60i (1035i), 1080/50i—

 

when COMPONENT input is selected. Normally, set to “AUTO.”

COMPO./RGB B

Selects the usage of the COMPONENT/RGB B terminals either as the COMPONENT input

 

terminal or as the RGB B input terminal.

SYNC TERM.*6

Adjusts the resistance of RGB B input terminals.

reset

Resets the Function Selection Menu settings to defaults.

STATUS DISPLAY: See page 22.

Shows the input mode and signal type on the screen.

*1 Adjustable when viewing the NTSC or PAL signal, or component signal. *2 Adjustable when viewing the NTSC signal or component signal.

*3 Adjustable when RGB A or RGB B input is selected.

*4 Not adjustable when viewing the following component signals—720/60p, 720/50p, 1080/60i (1035/60i), and 1080/50i. ( In such a case, “ASPECT” does not appear on the display.)

*5 Adjustable when VIDEO A, VIDEO B, or COMPONENT input is selected. *6 Adjustable when RGB B input is selected.

33

Page 34
Image 34
JVC GM X50U manual Bright