JVC HR-IP820U Setting Up Your VCR contd, Select the Band, Start Auto SET, Return to the TV Screen

HR-IP820U-EN-1 97.5.20 5:25 PM Page 10

Setting Up Your VCR (cont'd)

POR INSTRUCCIONES EN ESPAÑOL VEA p. 40 – 41.

Setting your VCR's tuner

FOLLOW INSTRUCTIONS ON THIS PAGE OR ON P. 12 – 14 DEPENDING ON YOUR CABLE BOX.

The Auto Set feature introduced here automatically assigns receivable channels in your area to the CHANNEL UP/DOWN buttons and skips the others so you won't have to go through any "blank" channels to get to the one you want.

	TURN ON THE VCR
	Press POWER.
POWER ON;	1 ■ If watching on channel 3 or 4, press TV/VIDEO to select
	the VIDEO mode. The VCR's VIDEO indicator will light.
SELECT CHANNEL
3 OR 4 (OR AV MODE)	ACCESS THE ON-SCREEN MENU

					2	Press MENU to access the
						Main Menu screen.	TUNER SET
						■ If the VCR Plus+ screen	⮕ BAND
							AFC
						appears press MENU again.	AUTO CHANNEL SET
							MANUAL CHANNEL SET
						Press SET to move the cursor	GUIDE CHANNEL SET
					3 to "TUNER SET", and then		GUIDE CHANNEL MAP
							PRESS (SELECT, SET +/–)
+						press SELECT.
	00000		00	0			PRESS (MENU) TO END
				0000
	000			000
	0	0	0	00
–	000			000		Press SET to move the cursor
	000			000
	00			00	4 to "BAND", and then press SELECT.

SELECT THE BAND

			5	Press SET to choose "TV" or
				"CATV".
		1		■ The BAND select feature	BAND
				has 2 settings (TV and
				CATV). Set to TV if your	⮕ TV
TV/VIDEO				antenna provides only UHF	CATV
				and VHF channels. Set to
				CATV if your antenna	PRESS (SET+/–) FOR CHOICE
1	2	3		system is a cable TV line.	PRESS (MENU) TO END
			6
4	5	6		Press MENU.
7	8	9	START AUTO SET
	0
				Press SET to move the cursor to "AUTO CHANNEL SET",
		2,6,8	7 and then press SELECT.
				■ Auto set is in progress and "SCANNING..." is displayed.
				■ When available channels are scanned, "ADD" will be
				displayed on the screen.
		3,4,7		■ When unavailable channels are skipped, "SKIP" will be
				displayed.
				■ After completion of auto set, the lowest tuned-in channel
				number and "SCAN COMPLETED" are displayed.
		5		■ If "SCAN COMPLETED — NO SIGNAL —" is
				displayed, check the band setting and connections, and
				start again. ☞ p.8.
				TUNER SET	AUTO CHANNEL SET
				BAND
				AFC
				⮕ AUTO CHANNEL SET	(TV)
				MANUAL CHANNEL SET	CH 5 ADD
				GUIDE CHANNEL SET
				GUIDE CHANNEL MAP	SCANNING . . .
				PRESS (SELECT, SET +/–)
				PRESS (MENU) TO END	PRESS (MENU) TO END
			RETURN TO THE TV SCREEN
You can also use the POWER, MENU, SET			8 Press MENU as many times as necessary to exit.
			Now go to ☞ p. 15 "Setting up the VCR Plus+ feature".
and SELECT buttons on the VCR.

10