Retroactive Indexing
Tapes recorded on another VCR can be indexed, and this index data can be added to the
ATTENTION
To make an RI tape, the VCR must be able to read Index Marks at the start of each program. If the VCR on which you recorded this tape didn't write these marks on the tape, you need to enter them manually. (See page 20 of the
Preparation
1.Turn on the power to the TV and the VCR.
2.Set the TV to the channel or mode appropriate for video playback.
3.Insert the tape you want to make into an RI tape.
To quit the process, press CANCEL.
●Pressing CANCEL at the first screen in step 3 returns you to the normal screen.
●Pressing CANCEL at the second screen in step 3 brings up the following confirmation screen:
ARE YOU SURE ?
ABANDON !
(ENTER) : YES
(CANCEL) : NO
If you are sure you want to stop, select "YES" by pressing ENTER. The normal screen appears.
If you decide not to abandon the process, select "NO" by pressing CANCEL. The above screens reappear, and
When the
Procedure
1Press INDEX Plus+. The screen to the right appears:
Press 3.
TAPE# CAN NOT BE READ
LIBRARY IS EMPTY
1 FIND
2 INPUT TAPE#
3
PRESS(1),(2)or(3) PRESS(INDEXPlus+)TO EXIT
4 The next screen looks |
|
| REVISE TITLE |
| |||
like this: | > |
| RESCANNED TAPE |
| #0013 | ||
| |||||||
| |||||||
| Program#001 | 30 | SP | ||||
| Program#002 | 80 | EP | ||||
| Program#003 | 120 | EP | ||||
(CANCEL)EXIT PAGE01 (ENTER):STORE (<<) (>>) 
UNDO 
INS 
DEL 
small
The Tape Number is automatically set by the VCR. Using the DIGIT and CURSOR buttons (VOL
NOTE: If your VCR's library is empty, 1 and 2 will not appear and LIBRARY IS EMPTY appears on screen.
REW, FF), input a name for each program.
2 The screen to the right | |
appears: | |
|
PRESS(ENTER)TO START
PROGRAM SEARCH
PRESS(CANCEL)TO RETURN
Press ENTER. If the tape was not at the beginning, the VCR rewinds it to that point. Then it begins searching for programs.
3The following screens appear:
|
| ||
|
| ||
Program#001 | 30 | SP | |
IN PROGRESS | Program#002 | 80 | EP |
When you're done, press INDEX Plus+ and the normal screen returns.
5Press STOP/EJECT to take the tape out. When ejecting a tape to which a number has just been automatically assigned, the screen to the right appears:
|
| REVISE | TITLE |
| |
> |
| PORTS |
| #0013 | |
| |||||
SWALLOWS VS | BAYS | 30 | SP | ||
SUPER JAPAN | CUP | 80 | EP | ||
DYNAMIC SOCCER | 120 | EP | |||
(CANCEL)EXIT PAGE01 (ENTER):STORE (<<) (>>) 
UNDO 
INS 
DEL small
PLEASE LABEL THE TAPE
TAPE# 13
IF OK,PRESS(ENTER)
SCANNING... | |
PAGE01 |
PRESS(CANCEL)TO ABANDON | PRESS(CANCEL)TO ABANDON |
IMPORTANT
Before you press ENTER to clear the screen, write the tape number on the tape label. The tape number will not be recorded on a Retroactively Indexed tape. Therefore it will be necessary to enter this tape number whenever this cassette is inserted in the VCR.
22
