& When the host station |
scan and Guide Channel |
set are successfully |
COMPLETE
● If using a cable connection . . .
completed, the screen to |
the right appears. Press |
CANCEL to return to the |
normal screen. |
PRESS(CANCEL)TO RETURN
. . . the display to the right appears superimposed on the TV picture during guide channel setting. Press
RECEIVING CHANNEL GUIDE NUMBERS
PRESS(CANCEL)TO CANCEL
NOTES:
● CSPG data is not available after Host Station |
Download Scanning until the CSPG data has been |
CANCEL to quit the process.
downloaded from the host station. CSPG can be |
received later at the next "Download Schedule" time. |
(Refer to "Download Data" and Download Schedule" |
on page 10.) |
● The Host Station Download Scanning function may |
take less than 10 minutes, or more than 45 minutes, |
to complete. During host station scanning, host |
station scanning messages will be displayed on |
screen on a blue background. |
● The scanning time will depend on a number of |
factors, including whether you are using an antenna |
or a cable connection, the number of channels you |
receive and whether or not changes to the channel |
map need to be made. |
● If the host station cannot |
be located through | ||
scanning, the screen to | DOWNLOAD HOST STATION | |
COULD NOT BE FOUND | ||
the right appears. If this | ||
happens, press CANCEL, | PLEASE TRY AGAIN LATER | |
wait a short while, then | ||
| ||
PRESS(CANCEL)TO RETURN | ||
| ||
from step 1. |
|
. . . if there is more than one host station in your area, the following screen may appear during guide channel setting. If it does, note the station name(s) appearing on the left side of the screen. Select the cable system on which you receive the station(s) by pressing REW (left) or FF (right). Then press MENU. Guide channel setting then continues.
|
| CABLE B | C | D | E | F | Cable | |
|
|
|
|
|
|
| system | |
|
| A&E : 15 | 25 | 30 | 52 | 8 | ||
|
|
| ||||||
|
| FAM : | 12 | 18 | 22 |
| ||
Station |
| WGN : 53 115 | 25 | 33 | 51 | Channel | ||
| CNN :102 |
|
|
|
|
| ||
| 10 | 34 | 88 | 75 | ||||
name |
| number | ||||||
| TNN : 23 | 45 | 15 | |||||
|
| WXYZ:125 | 1 | 10 | 20 | 30 |
| |
|
| SELECT CABLE |
| |||||
|
| WITH(REW/FF) | THEN | (MENU) |
| |||
As many as 6 station names and 9 cable systems (A – I) can be displayed.
EXAMPLE
If you receive A&E on channel 25, FAM on channel 12, WGN on channel 115, CNN on channel 10, TNN on channel 45 and WXYZ on channel 1, . . .
1.Press REW or FF to select "C". "C" begins blinking.
2.Press MENU.
●If Guide Channel data could not be obtained, the screen to the right appears. If this happens, perform the setting manually (refer to page
15 of the
AUTOMATIC GUIDE CHANNEL SETTING IS NOT AVAILABLE
PLEASE SET MANUALLY
PRESS(CANCEL)TO RETURN
7
