Special Features
The provided remote control is capable of controlling 10 different TV brands including JVC and 13 different Cable Box brands. Follow the instructions below to set the appropriate code for your TV or Cable Box.
|
| POWER |
TV/VIDEO |
|
|
1 | 2 | 3 |
4 | 5 | 6 |
ENTER |
| Digit keys |
7 | 8 | 9 |
TV/CABLE | 0 |
|
switch |
| VCR switch |
|
| |
VOL. +/– |
|
|
|
| CH +/– |
|
| STOP |
TV Brand Name And Code
TV BRAND NAME | BRAND CODE |
|
|
JVC | 01 |
MAGNAVOX | 02 |
MITSUBISHI | 03 |
PANASONIC | 04 |
RCA | 05 |
SHARP | 06 |
SONY | 07 |
TOSHIBA | 08 |
ZENITH | 09 |
HITACHI | 10 |
|
|
Cable Box Brand Name And Code
CABLE BOX BRAND NAME | BRAND CODE |
|
|
GI | 01,02,03,04,05,06,07,08 |
JERROLD | 01,02,03,04,05,06,07,08 |
SCIENTIFIC ATLANTA | 09,10 |
ZENITH | 11,12 |
PIONEER | 13,14 |
HAMLIN | 15,16,17,18 |
REGAL | 15,16,17,18 |
OAK | 19,20,21 |
SIGMA | 19,20,21 |
TOCOM | 22,23 |
RCA | 24,25,26 |
PANASONIC | 24,25,26 |
SPRUCER | 24,25,26 |
|
|
TV Multi-Brand Remote Control
If your TV is a JVC, you don't have to set the TV code.
PREPARATION
1Turn off the TV by using the TV's remote control.
2Set the VCR switch to the left.
3Set the TV/CABLE switch to "TV".
4While holding down the POWER button, enter your TV's brand code with the Digit keys then press STOP.
■Brand setting is completed. Once you set the brand, you do not have to reset it until the remote's batteries are replaced.
■If you set the wrong code,
5Press POWER to turn the TV power on and check to see if the remote control works with the TV.
OPERATION
1Set the VCR switch to the left.
2Set the remote control's TV/CABLE switch to "TV".
3Operate the TV.
■POWER, TV/VIDEO, CH
4To operate VCR, set the VCR switch to "VCR".
Cable Box Multi-Brand Remote Control
Some Cable Box brands have more than one code. When your Cable Box does not function with a specified code, try other codes.
PREPARATION
1Turn off the Cable Box by using the Cable Box's remote control.
2Set the VCR switch to the left.
3Set the TV/CABLE switch to "CABLE".
4While holding down the POWER button, enter your Cable Box's brand code with the Digit keys then press STOP.
■Brand setting is completed. Once you set the brand, you do not have to reset it until the remote's batteries are replaced.
■If you set the wrong code,
5Press POWER to turn the Cable Box's power on and check to see if the remote control works with the Cable Box.
OPERATION
1Set the VCR switch to the left.
2Set the remote control's TV/CABLE switch to "CABLE".
3Operate the Cable Box.
■ POWER and CH +/– buttons are available.
4To operate VCR, set the VCR switch to "VCR".
NOTES:
■It is necessary to set the cable box brand in your remote control (this page) and the Cable Box Controller (☞p. 14) individually.
With the remote control, you can change channels using the CH +/– button and turn on/off your cable box.
With the Cable Box Controller, your cable box’s channels can be automatically changed during
■Cable box brands available for the remote control (listed on the left) differ from those that are available for the Cable Box Controller (☞p. 14).
■It is possible that the remote control will not operate your cable box even if the cable box’s channels automatically change during timer- recording using the Cable Box Controller.
31
