JVC HR-IP820U instruction manual Revising/Erasing Directories contd, Tape Number Changes

HR-IP820U INDEX Plus+ 97.5.20 5:45 PM Page 20

Revising/Erasing Directories (cont'd)

F4 (CAPS/small): Program titles can be made to appear in all capital letters, all lower-case letters, or a combination of the two. The default setting is capital. To change a letter to lower case, place the frame on it and press 6 (PAUSE). Press 6 (PAUSE) again to change it back to a capital letter. To input a lower-case letter, press F4 (noting that "small" has changed to "CAPS" at the bottom of the screen) and then input the letter.

NOTES:

●The function of F4 displayed is always the opposite of the form of a letter you input.

EX. If you input a letter when "CAPS" is displayed, the letter will be lower case.

●Press CLEAR to delete the previous letter.

●To copy a title, press PLAY when the cursor is next to that title. Then move the cursor to the location where the copied title is to be placed and press STOP. The new title supercedes the previous one.

Once you've made all desired changes, press ENTER and the directory reappears.

Tape Number Changes

Procedure

1Follow the instructions in the box in the first section of page 19 for accessing the REVISE screen. When it appears, press 2.

REVISE￿

￿

1TITLE￿

2 TAPE#￿

3 ERASE DIRECTORY￿

￿

￿

PRESS(1),(2)or(3)￿

PRESS(CANCEL)TO RETURN￿

￿

2The TAPE# screen appears.

TAPE#￿

CURRENT NEW￿

12 ￿

PRESS(DIGITS)￿

THEN PRESS(ENTER)￿

PRESS(CLEAR)TO MAKE￿

CORRECTION￿

PRESS(CANCEL)TO RETURN

Under "CURRENT", the number of the tape whose directory you accessed appears automatically. (See NOTE at the end of this page.) The frame appears to the far right, under "NEW". Input the new Tape Number using the DIGIT buttons. Press CLEAR to make corrections, or CANCEL to quit the process. Once the number is input, press ENTER.

3If the new number you input is already assigned to another tape, the screen looks like this:

￿

￿

￿

TAPE#0110 ALREADY EXISTS￿

￿

￿

￿

￿

PRESS(CANCEL)TO RETURN￿

PRESS(INDEXPlus+)TO EXIT￿

￿

Wait a few seconds, or press CANCEL, to return to the TAPE# screen.

If the new number you input is accepted, the directory reappears, with the new Tape Number displayed in the top right portion of the screen.

NOTE: At the TAPE# screen, you can change the CURRENT number. However, if you are not exactly sure of the contents of the tape represented by that number, you are advised to access that tape's directory and confirm the contents before changing the number. If the number you input under "CURRENT" is not in memory, a screen appears to tell you this. Wait a few seconds, or press CANCEL, to return to the TAPE# screen.

Continued on next page.

20