JVC HR-IP820U To Timer-Record Daily Serials, To Timer-Record Weekly Serials, SET to Timer Mode

PROGRAM 1

DATE 12/25 MON

START 18:00 PM

STOP 10:05 PM

CHANNEL 11:25 EP

HR-IP820U-EN-2 97.5.20 5:32 PM Page 27

				8
DAILY	1	2	3
(M-F)	4	5	6
	7	8	9	WEEKLY
		0

6,7

"ERROR" WARNING

If the PlusCode number you input
is incorrect, "ERROR" may appear	VCR PLUS+
on the screen to advise you of the
error. This happens when the code	23699
is for a program which has already		ERROR
	PRESS (DIGIT)
passed. "ERROR" is displayed for
about 4 seconds and returns to the	THEN PRESS (SELECT)
	PRESS (MENU) TO END
input screen (step 2).

RETURN TO THE TV SCREEN

6 Press MENU.

■Select the desired Auto Timer setting. See page 30 for details.

7 Press MENU again.

SET TO TIMER MODE

8 Press TIMER.

■The VCR will enter the timer mode and power will go off.

For AUTO TIMER and other timer programming features, ☞ p. 30. For other error indications, ☞ p. 37.

To Timer-Record Daily Serials

This function lets you set the recorder to timer-record at the same time every day, Monday through Friday.

■After pressing SELECT in step 4, press DAILY (Digit key 8). "DAILY" will appear.

To Timer-Record Weekly Serials

This function lets you set the recorder to timer-record at the same time on the same day every week.

■After pressing SELECT in step 4, press WEEKLY (Digit key 9). "WEEKLY" will appear.

TO MAKE CHANGES IN THE

SETTINGS

You can delay a program's stop time or make other such "revisions" in the settings.

1 After step 5, press SELECT.

2 Press SELECT to move to the setting you wish to change, so that it blinks.

3	Press SET to make the change.	PRESS (SELECT, SET +/–)
4	Return to step 6.	PRESS (MENU) TO END

TO DISENGAGE THE TIMER

For safety, when AUTO TIMER is "OFF", your VCR disables all other functions while in the timer mode.

■To use your VCR, first disengage the timer mode by pressing TIMER again. Now all functions will be operable.

■To re-engage the timer, press TIMER.

NOTES:

■If there is a power failure the VCR will remember your timer-record selections for 10 minutes.

■If a program that is being timer-recorded sends a timer-extension signal, the VCR automatically extends recording time to accommodate the change. (INDEX PLUS+ FUNCTIONS SETTING must be set to "ON". Refer to page 8 of the INDEX Plus+ manual.)

27