JVC HR-IP820U instruction manual Preparing To Use Index Plus+, Download Function Setting

HR-IP820U INDEX Plus+ 97.5.20 5:44 PM Page 5

Preparing To Use INDEX Plus+

Before you can receive CSPG (Channel-Specific Programming Guide) data from a host station, or reference tapes or programs using INDEX Plus+, you must perform the following procedure.

Before continuing . . .

Refer to pages 8 – 12 of the HR-IP820U's instruction manual and perform the following procedures:

●Connection

●Tuner Setting

●Cable Box Controller Setting (if a Cable Box is used)

Download Function Setting

What is "downloading"? With INDEX Plus+, it means receiving CSPG data from the host station and storing it in your VCR's internal memory. When required this data can be accessed. The host station receives information from regular and cable TV broadcasters and sends this information along with its own as CSPG data. The host station sends information around the clock, even late at night when most VCRs aren't in use. This gives you access to new information on a daily basis.

Preparation

1.Turn on the power to the TV and the VCR.

*If you use a cable box, turn on its power.

2.Set the TV to the channel or mode appropriate for video playback.

Procedure

Download Function Confirmation

1Press MENU as many times as necessary to select "MAIN MENU".

2Press SET to select "SET-UP MENU", then press

SELECT.

3 Press SET to select	DOWNLOAD FUNCTION SETUP￿
"DOWNLOAD	￿
FUNCTION SET-UP",		DOWNLOAD FUNCTION￿
		ZIP CODE￿
then press SELECT. The		TIME ZONE￿
		ANTENNA CONNECTION￿
screen to the right		PREFERRED CHANNEL￿
	￿
appears:
	PRESS(SELECT,SET+/-)￿
	(0):SCHEDULE (MENU):END

NOTE: The "ANTENNA CONNECTION" option only appears here when the "CABLE BOX OUTPUT" at the CABLE BOX SET screen is set to "OFF". (Refer to page 13 of the HR-IP820U instruction manual.)

4 Press SET to select	DOWNLOAD FUNCTION￿
"DOWNLOAD
	￿
FUNCTION", then press	￿
		ON￿
SELECT. The screen to		OFF￿
	￿
the right appears:
	￿
	￿
	PRESS(SET+/-) FOR CHOICE￿
	PRESS(MENU) TO END

5Press SET to select "ON", then press MENU. The DOWNLOAD FUNCTION SET-UP screen reappears.

NOTE: If you decide you don't want to receive CSPG from the host station, select "OFF" at the DOWNLOAD FUNCTION confirmation screen.

Inputting Zip Code

6Press SET to select "ZIP

CODE", then press	ZIP CODE￿
SELECT. The next	￿
	[ 91	]￿
screen looks like this:
	￿
	￿
	￿
	PRESS(DIGITS)￿
	PRESS(MENU) TO END

7Using the DIGIT buttons, input the zip code (up to 5 digits) of the area in which the VCR is being used. To make corrections, press CLEAR to delete the digit farthest to the right. Once the incorrect digit has been deleted, enter the correct one.

8Press MENU. The DOWNLOAD FUNCTION screen reappears.

ATTENTION

If you input a zip code following host station scanning, all download data will be lost.

Continued on next page.

5