JVC HR-IP820U instruction manual Playback, To adjust tracking manually

HR-IP820U-EN-1 97.5.20 5:25 PM Page 17

Playback

POR INSTRUCCIONES EN ESPAÑOL VEA p. 40 – 41.

The easiest, most basic operation possible with your VCR is tape playback. Previously-recorded signals on a video tape are read by your VCR and displayed on your TV just like a TV program.

POWER ON; SELECT CHANNEL

3 OR 4 (OR AV MODE)

	SHUTTLE
+		000	0
	000	0	000
	000		0000
	000		0
–	000		000
	000		000
	00		00

CH –/+ 1 6

1 2 3

4 5 6

7 8 9

0

2

CH/SET –/+

4 5

3

LOAD A CASSETTE

1 Insert a cassette with its window side up, and label side facing you. Press gradually on the middle of the cassette until the VCR pulls the cassette in.

■The VCR power will come on automatically.

■"READING TAPE#..." will appear on the screen unless INDEX Plus+ functions are set to OFF. (☞ p.12 of INDEX Plus+ instruction manual.)

■The counter will be reset to "0H 00M 00S" automatically.

■If the safety tab on the cassette is absent, playback will start automatically.

TO START PLAYBACK

2 Press PLAY.

TO STOP PLAYBACK

3 Press STOP.

TO REWIND OR FAST-FORWARD

4	Press REW to rewind the tape.
5	Press FF to fast-forward the tape.

■ Press STOP to stop the tape.

■ To rewind or fast-forward the tape using the VCR's control, turn the SHUTTLE ring fully to the corresponding direction, and release it.

TO EJECT THE TAPE

6 Press the VCR's STOP/EJECT button again.

To adjust tracking manually

This overrides your VCR's automatic tracking.

During Playback...

1Press the VCR's CH(annel) +/– buttons simultaneously to cancel auto tracking.

■The remote control's CH +/– cannot be used for this purpose.

2Press CH + or – to adjust tracking.

■Press the VCR's CH +/– simultaneously to return to automatic tracking.

During Slow...

1Simply press CH + or – to adjust tracking.

17