HR-IP820U INDEX Plus+ 97.5.20 5:45 PM Page 9

Program End Selection

Program end selection allows you to choose whether the tape should continue to play or stop after your playback selection has finished. The selection made before playback starts cannot be overridden. Even if you access the screen below and change the setting after playback begins, the change has no effect.

7 Press SET to select

AT THE END OF A PROGRAM￿

"PROGRAM END

 

 

￿

SELECTION", then

￿

 

 

CONTINUE TO PLAY￿

press SELECT. The

 

 

 

 

STOP AND DISPLAY THE￿

screen to the right

 

 

DIRECTORY￿

￿

appears:

￿

 

PRESS(SET+/-) FOR CHOICE￿

 

PRESS(MENU) TO END

8Press SET to select either "CONTINUE TO PLAY" or "STOP AND DISPLAY THE DIRECTORY". CONTINUE TO PLAY means that, when the end of a program is reached on an HR, PR or RI tape, playback of the next program begins automatically. If you only want to watch the selected program, select STOP AND DISPLAY THE DIRECTORY. Once the selected program ends, the tape's directory appears. (If the selected program ends near the end of the tape, the directory may not appear.)

9Press MENU. The INDEX PLUS+ INITIAL SET screen reappears.

INDEX PLUS+ Functions Setting

Using the INDEX Plus+ Functions screen, the INDEX Plus+ system can be disabled.

The INDEX Plus+ functions default setting is "ON". To disable INDEX Plus+, perform the following steps:

0 Press SET to select

INDEX PLUS+ FUNCTIONS￿

"INDEX PLUS+

￿

FUNCTIONS", then

￿

 

 

ON￿

press SELECT. The

 

 

OFF￿

screen to the right

￿

￿

appears:

￿

 

PRESS(SET+/-) FOR CHOICE￿

 

PRESS(MENU) TO END

!Press SET to select "OFF". INDEX Plus+ is now disabled.

@Press MENU as many times as necessary to return to the normal screen.

ATTENTION

When combining the contents of several tapes recognized by this VCR's library into one tape, make sure that you set INDEX PLUS+ FUNCTIONS to ON and use this VCR as the recorder. If you record with INDEX PLUS+ FUNCTIONS set to OFF, or if you use a non- INDEX Plus+ VCR as the recorder, you must set INDEX PLUS+ FUNCTIONS to OFF to playback on this VCR, or problems will arise in the library.

9

Page 53
Image 53
JVC HR-IP820U instruction manual Program End Selection, Index PLUS+ Functions Setting