POWER | Shuttle ring | ||
+ |
|
|
|
|
| 0 | 00 |
| 000 | 00 | 00 |
| 0 | 000 | |
| 000 |
| 0000 |
| 000 |
| 0 |
– | 000 |
| 000 |
000 | 000 | ||
| 00 | 00 | |
PLAY
POWER
|
| DISPLAY |
|
| TIMER |
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
| 0 | C.RESET |
C.MEMORY
PLAY
REW
STOP
Counter Reset
To reset the tape counter to zero.
1Press C. RESET.
■ Pressing DISPLAY repeatedly changes the VCR's
displayed indication. (Counter reading [ Channel* [ Clock time).
*Channel is not displayed during playback.
Counter Memory
To return to tape position zero.
During Playback...
1Press C. RESET at a point you wish to locate later.
■The counter will read "0H 00M 00S".
2Press C. MEMORY.
■Counter Memory mark is displayed.
3When you wish to return to that point, press STOP and then press REW.
■The tape will rewind and stop at about "0H 00M 00S" automatically.
4To cancel the Counter Memory mode, press C. MEMORY.
Next-Function Memory
You can "tell" the VCR what to do immediately after rewinding.
During Stop:
For automatic start of playback after the tape is rewound...
1Press REW.
2Press PLAY within 2 seconds.
For automatic power off after the tape is rewound...
1Press REW.
2Press POWER within 2 seconds.
For automatic timer standby after the tape is rewound...
1Press REW.
2Press TIMER within 2 seconds.
■To do the above using the VCR's controls:
During Stop, turn the Shuttle all the way to the left and release it instead of pressing REW, and then press PLAY or POWER within 2 seconds.
■If you want the "next function" to automatically start when the counter reads "0H 00M 00S" (instead of at the beginning of the tape), press C. MEMORY so that the counter memory "M" mark appears on the VCR display panel before pressing REW or FF.
21
