Setting Up Your VCR (cont'd)
POWER ON; SELECT CHANNEL
3 OR 4 (OR AV MODE)
+ |
| 000 | 0 |
| 000 | 0000 | |
| 0 | 000 | |
| 000 |
| 0000 |
| 000 |
| 0 |
– | 000 |
| 000 |
000 | 000 | ||
| 00 | 00 | |
|
|
| 1 |
TV/VIDEO |
|
|
|
1 | 2 | 3 |
|
4 | 5 | 6 | 4,5 |
7 | 8 | 9 | |
| 0 |
|
|
INPUT THE GUIDE CHANNEL
Press SET or the Digit keys to |
|
|
|
|
|
| |
4 input the Guide Channel | GUIDE CHANNEL SET | ||||||
number (as shown in TV | GUIDE CH : VCR CH | ||||||
listing or this manual), and |
|
|
|
|
|
| |
|
| 15 | : | 15 | |||
then press SELECT. |
|
| |||||
|
|
|
|
|
| ||
PRESS | |||||||
| |||||||
| PR(SELECT, SET | ||||||
| PRESS (MENU) TO END | ||||||
INPUT THE RECEIVING CHANNEL
If you don't use an external
Cable Box . . .
5 Press SET or the Digit keys to
input the channel number your VCR receives the station on, and then press SELECT.
■ If there are other GUIDE CH numbers which don't match
with the VCR CH numbers, input the changes by repeating steps 4 – 5.
If you use an external Cable Box . . .
5 Press SET or the Digit keys
to input the channel number your Cable Box receives the station on, and then press SELECT.
■If there are other GUIDE CH numbers which don't match with the CABLE CH numbers, input the changes by repeating steps 4 – 5.
CHECK THE GUIDE CHANNEL MAP
2,6,8 |
2,3,4, |
5,7 |
6 Press MENU once to go back to the Tuner Set menu.
7 Press SET to move the cursor to "GUIDE CHANNEL MAP", and then press SELECT.
■A screen with GUIDE CH numbers (in ascending order) with their corresponding VCR CH numbers will be displayed. Check to make sure your entries are correct.
■If there are more than 10 entries, press SELECT to display the 11th and higher entries.
TUNER SET
BAND
AFC
AUTO CHANNEL SET MANUAL CHANNEL SET GUIDE CHANNEL SET
⮕GUIDE CHANNEL MAP
PRESS (SELECT, SET
PRESS (MENU) TO END
GUIDE CHANNEL MAP
GUIDE | : VCR | GUIDE | : VCR | ||
6 | : | 47 | 10 | : | 55 |
12 | : | 41 | 15 | : | 38 |
33 | : | 28 | 67 | : | 49 |
PRESS (SELECT) TO NEXT PRESS (MENU) TO END
NOTES:
■After host station scanning (refer to page 6 of the INDEX Plus+ instruction manual), when Guide Channel Setting is taking place, changes or additions are also performed if you pressed 1 in step 8.
■If you pressed 2 in step 8 but later decide you want automatic updating, you have to
RETURN TO THE TV SCREEN
8 Press MENU as many times as necessary to exit.
■After host station scanning, if
Guide Channel Setting is completed automatically, a screen like the one to the right appears prior to the normal screen.
You can choose whether or not the Guide Channel will
automatically be updated when changes or additions occur. To select automatic updating, press 1.
To make changes manually, press 2.
16
