Playback connection

Connect to a Stereo Amplifier with Audio Output

If your DVD/VCR is connected to a stereo amplifier, the video soundtrack can output through the loudspeakers of the stereo system.

SCART-cable (not supplied)

SCART-Socket

 

To SCART

 

input

(for TV-RGB/Composite)

DVD/VCR

 

 

Stereo Amplifier

 

Audio (L) Output

To Audio (L) Input

TV

Audio (R) Output

 

AUDIO Cord (not supplied)

To Audio (R) Input

 

 

 

Connect to an AV Amplifier with built-in digital surround

If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems such as Dolby Digital and DTS by using the Coaxial Digital Output.

Use this connection to connect an:

AV amplifier with built-in *Dolby Digital decoder

AV amplifier with built-in *DTS decoder

DVD/VCR

SCART-cable (not supplied)

SCART-Socket

(for TV-RGB/Composite)

To SCART input

TV

Coaxial digital

 

AV Amplifier with

Coaxial digital cable

built-in various

Audio Output

decoder as above

 

(not supplied)

 

Connecting the optical digital cable

You may connect to an AV Amplifier with an Optical digital cable (not supplied) instead of a Coaxial digital cable.

When you connect the optical digital cable (not supplied), remove the dust protection cap from the rear panel. When not using the optical digital cable, attach the dust protection cap to protect against dust.

NOTES:

The OPTICAL, COAXIAL jacks are useful only for DVD section.

VHS signal is output only from the SCART-sockets, AUDIO L/R jacks and RF OUT jack.

When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL or DTS to ON on the AV Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be damaged.

DTS audio will be output only from the COAXIAL output. To hear DTS audio, DTS-Decoder is necessary. When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.

Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.

12

Page 12
Image 12
JVC HR-XV1EK Playback connection, Connect to a Stereo Amplifier with Audio Output, Connecting the optical digital cable